FAAC J275 F Fixed Traffic Bollard

Permanent Vehicle Access Control for Commercial and Restricted Areas The FAAC J275 F Fixed Traffic Bollard provides permanent vehicle restriction for commercial, industrial, urban, and controlled-access areas where a retractable bollard is not required. It can be used on its own to define restricted vehicle zones or alongside FAAC J275 retractable bollards to maintain a consistent appearance across an entrance or perimeter. The J275 F features a 10.8-inch (275 mm) diameter cylinder and is available in 600 mm or 800 mm heights, with a choice of painted steel or satin-finished AISI 316L stainless steel. Because the bollard remains permanently raised, no hydraulic system, gate controller, or operating power is required. An integrated warning light ring with central LED is included. The bollard itself requires no electrical connection, but the LED lighting can be powered separately with 24 VDC when illuminated visibility is desired. Key Features Fixed traffic bollard for permanent vehicle restriction Designed for commercial, industrial, and urban restricted-access areas Available in 600 mm and 800 mm heights Choice of painted steel or AISI 316L stainless steel 10.8 in (275 mm) cylinder diameter across all variants Coordinates visually with J275 automatic and semi-automatic bollards No operator, hydraulic system, or control board required No electrical wiring required unless the integrated LED lighting is used Integrated warning light ring with central LED Orange reflective strip improves bollard visibility Installs to a dedicated fixed bollard counterframe Technical Specifications Manufacturer: FAAC Series: J275 Model: J275 F Product Type: Fixed traffic bollard Application: Commercial, industrial, urban, and restricted vehicle access Cylinder Diameter: 10.8 in (275 mm) Available Heights: 23.6 in (600 mm) or 31.5 in (800 mm) Painted Steel Material: S235JR EN 10219 steel Painted Steel Thickness: 0.16 in (4 mm) Painted Steel Finish: Cataphoresis treatment with dark gray metallic RAL 7021 polyester powder coating Stainless Steel Material: AISI 316L stainless steel Stainless Steel Thickness: 0.12 in (3 mm) Stainless Steel Finish: Satin finish Reflective Strip Height: 2.2 in (55 mm) Standard Reflective Strip Color: Orange Break-In Resistance, H600: 35 kJ Break-In Resistance, H800: 59 kJ H600 Weight: 75 lb (34 kg) H800 Weight: 84 lb (38 kg) LED Supply, If Used: 24 VDC, 90 mA Fixed Bollard Counterframe: FAAC JPF275, Part Number 116120, sold separately Variants J275 F H600 Painted Steel: 23.6 in (600 mm) high J275 F H800 Painted Steel: 31.5 in (800 mm) high J275 F H600 Stainless Steel: 23.6 in (600 mm) high, satin-finished AISI 316L J275 F H800 Stainless Steel: 31.5 in (800 mm) high, satin-finished AISI 316L Installation Considerations The J275 F mounts to the FAAC JPF275 fixed bollard counterframe, Part Number 116120. The installation instructions specify a 450 x 450 mm counterframe and an excavation approximately 750 x 750 x 150 mm, with the counterframe secured in concrete and installed level. If the integrated LED warning ring will be used, electrical conduit should be provided during installation. The LED operates at 24 VDC and requires a suitable external power supply and wiring. Conclusion The FAAC J275 F is designed for locations that need a permanently raised vehicle barrier while maintaining the same appearance as J275 retractable bollards. Choose between 600 mm and 800 mm heights and painted or AISI 316L stainless steel finishes based on the site layout, visibility requirements, and surrounding architecture. Cut Sheet Installation / User Manual