Switchblade Jacking Pucks - C5-C8 Corvette

Install them once. Stop screwing around with loose jack pucks. We’re not going to pretend a jacking puck is some revolutionary piece of engineering. It is, however, something you need every single time your Corvette goes on a jack or lift, so we wanted to make one that wasn’t a pain in the ass to use. After testing these on the AMT C8 Corvette for two full seasons, we addressed every shortcoming we could find and are now proudly offering our Switchblade Jacking Pucks for all C5–C8 Corvettes. Simple, fast, and permanent. AMT Motorsport Switchblades install into the factory lift points with a simple quarter turn and remain securely attached to the car. Install them once, and your jack points are always easy to find and ready to use—without crawling underneath the car while trying to hold a loose puck in place and simultaneously line up your floor jack. Overview & Installation See the Switchblade in action. See exactly how the Switchblade works, what makes it different, and how to install a complete set on your Corvette. Watch the Video The AMT Difference What makes these more than random eBay junk? Lots of cool stuff, actually. None of it is complicated. Every detail simply makes them easier to install, easier to use, and better suited to staying underneath your Corvette for years. 01 Captive Hardware Our captive-nut design keeps the retaining nut from falling off during installation. A custom-machined screw and captive locking washer eliminate the nerve-racking possibility of losing a nut inside the frame and listening to it rattle around for eternity. Custom screw and captive locking washer means no loose nut disappearing inside the frame. 02 Extra Clearance At 3/4-inch thick, the Switchblade provides a little more room between your floor jack and any expensive side skirts you may be running. Extra thickness helps get a jack underneath the car with less drama. 03 Weight-Weenie Approved Because the pucks are slightly thicker—and because we’re weight weenies—we machine away as much unnecessary material as possible. Each assembly weighs approximately 152 grams, or about 1.34 pounds for the full set of four. Pocketed aggressively to remove unnecessary weight without sacrificing function. 04 No Mini-Swamp Cross-drilled drainage holes connect the internal pockets to the center screw opening, preventing the pucks from filling with water and forming a miniature swamp underneath your car. Drainage holes keep water from collecting inside the machined pockets. Made Properly Machined in-house from solid 6061-T6 aluminum. Each puck features a large contact surface for floor jacks and two-post lifts. The low-profile locking mechanism securely captures the factory mounting point without drilling, adhesives, or permanent modifications to the car. The engraved LIFT marking also gives you—or whichever technician is working on your Corvette—a very clear indication of exactly where the car should be lifted. Made Here. New York, USA Specifications Fitment All C5–C8 Corvettes Material 6061-T6 aluminum Thickness 3/4 inch Weight Approximately 152 g each / 1.34 lb per set Finish Black or red anodize Quantity Complete set of four Features Fits all C5–C8 Corvettes Simple installation Remains securely installed Custom captive hardware No loose nut inside the frame Extra-thick lifting surface Cross-drilled drainage holes Large floor-jack contact area No drilling or adhesives No permanent modifications Black or red anodized finish Designed and manufactured in New York Lifetime guarantee The AMT Promise Guaranteed for life. Designed, machined, anodized, laser engraved, and assembled at our facility in New York, USA. And because it’s an AMT product, we stand behind it for life.