Votatec PIR Motion Sensor Switch – Occupancy & Vacancy Modes, 180° Detection, Adjustable Time, Light & Sensitivity, 120V

Votatec PIR Motion Sensor Switch Improve convenience and reduce unnecessary energy use with the Votatec BAG-001 Motion Sensor Switch. Its passive infrared (PIR) sensor detects movement across a wide 180-degree field of view and automatically controls connected indoor lighting. The switch supports occupancy, vacancy and manual operating modes. Adjustable sensitivity, ambient-light level and time delay allow the sensor to be configured for bathrooms, laundry rooms, garages, hallways, offices, storage rooms and other indoor spaces. Important: This model requires a neutral wire and is designed for single-pole circuits. It is an ON/OFF motion sensor switch and does not provide dimming control. Key Features 180° PIR motion detection: Wide field of view provides reliable motion detection when installed with an unobstructed view of the room Occupancy mode: Automatically turns the light on when motion is detected and turns it off after the selected delay Vacancy mode: Light is turned on manually and switches off automatically after the room becomes vacant Manual control: Built-in push button allows the connected light to be turned on or off manually Adjustable time delay: Set the automatic shut-off period from approximately 5 seconds to 10 minutes Adjustable sensitivity: Change the motion-detection sensitivity to suit the room size and application Adjustable ambient-light level: Helps prevent automatic activation when sufficient natural or surrounding light is available Fresnel sensor lens: Segmented lens is designed to improve PIR detection sensitivity and coverage LED status indicator: Provides a visual indication of sensor operation Single-pole installation: Designed to control a lighting load from one wall-switch location Standard in-wall design: Compatible with most standard North American switch boxes and wall plates cUL Listed: Evaluated for applicable Canadian and U.S. safety requirements Operating Modes Occupancy Mode – Auto ON / Auto OFF The connected light turns on automatically when motion is detected, subject to the selected ambient-light setting. The light turns off after the selected delay when no further motion is detected. Vacancy Mode – Manual ON / Auto OFF Press the button to turn the light on manually. The sensor automatically turns it off after the area becomes vacant and the selected delay expires. Manual Control Use the front push button for direct ON/OFF control when required. Three Adjustable Controls SENS: Adjusts the motion-detection sensitivity LUX: Adjusts the ambient-light threshold for automatic operation TIME: Adjusts the shut-off delay from approximately 5 seconds to 10 minutes Typical Applications Bathrooms and powder rooms Laundry and utility rooms Garages and workshops Hallways and entrances Storage rooms Offices and meeting rooms Basements Other dry indoor spaces Product Specifications Brand Votatec Model BAG-001 Product Type PIR Motion Sensor Switch Rated Voltage 120V AC, 60Hz Circuit Type Single pole Sensor Technology Passive infrared (PIR) Detection Angle 180° Operating Modes Occupancy, vacancy and manual control Time Delay Adjustable from approximately 5 seconds to 10 minutes Tungsten Load 1000W maximum Ballast Load 1000VA maximum Electronic Ballast/LED Load 5A maximum Motor Load 1/4 HP maximum Neutral Wire Required Installation In-wall Application Indoor use only Operating Temperature 0°C to 40°C (32°F to 104°F) Dimensions 4.13 × 1.77 × 1.75 in. (10.5 × 4.5 × 4.44 cm) Material Plastic and aluminum Colour White Safety Listing cUL Listed Applicable Standards UL 773A and CSA C22.2 No. 284-16 Warranty 2 years Before Ordering A neutral wire is required inside the electrical box. This model is intended for a single-pole circuit. This is an ON/OFF sensor switch and does not provide dimming. Confirm that the connected load does not exceed the applicable rating. The sensor requires an unobstructed field of view for reliable motion detection. Actual detection performance may vary based on room layout, mounting position, temperature and obstructions. This product is intended for dry indoor locations only. Installation Notice Turn off power at the circuit breaker and confirm that the circuit is de-energized before installation. Connect the line, load, neutral and ground wires according to the supplied wiring diagram. Installation must comply with applicable electrical codes and should be completed by a qualified electrician. Download Product Spec Sheet