iQFoil Full Set Windsurfing Sail Stickers

Everything you need to compete on the water in one bundle. This full set of custom printed iQFOil sail stickers covers one complete sail — class legal for Senior Men, Senior Women and Youth U19 fleets under the current World Sailing & iQFOil Class rules (updated January 2025 for the LA 2028 Olympic cycle). Each set is printed to your exact sail number, name and nationality, then precision cut on our large-format equipment here on the South Coast. Designed and made by windsurfers — we race this equipment ourselves. What's included Item Detail Qty Sail Numbers Custom printed to your racing number ×2 Name Strip Your surname or rider name ×2 Nationality Flag Digitally printed to your country code ×2 One set covers one complete sail. All items are fully custom printed to your nationality, name and sail number. Class legal — 2025 onwards Fleet Sail Size Senior Men 8.0m² (Severne HGO) Senior Women 7.3m² (Severne HGO) Youth U19 Men 8.0m² Youth U19 Women 7.3m² Sail sizes updated January 2025 under World Sailing & iQFOil Class rules, valid for the LA 2028 Olympic cycle. Specifications Letter height Approx. 230mm (max) Max width (7 characters) Up to 1440mm Background margin Approx. 20mm — aids alignment on sail Material Marine-grade gloss vinyl, block-out backing Print method Digital large-format print, precision cut Turnaround 2–3 business days from proof approval Shipping Worldwide The block-out backing prevents your numbers from ghosting through when sunlight shines through the sail. All stickers are digitally printed and precision cut on our large-format equipment here on the South Coast. Application guide Dry application + Clean the surface. Wipe the area with isopropyl alcohol and a lint-free cloth. Allow to dry fully before applying. Peel the backing. Peel the white backing paper from one edge, leaving the sticker on the application tape. Position. Hold by the application tape and place on the sail. Use the background margin to align square. Don't press yet. Smooth from centre out. Press the centre first, then smooth outward to the edges with a card or squeegee to clear any air. Remove the application tape. Peel back slowly at a low angle. If any part lifts with it, press back down and retry. Final press. Run over edges and corners firmly once more. Wet application + Mix a soapy solution. A few drops of washing-up liquid in a spray bottle of clean water — light, not foamy. Spray the sail surface. Mist the application area lightly. This slows the adhesive and gives you time to position. Peel and spray the sticker. Peel the backing, then lightly mist the adhesive side too. Slide into position. Place and adjust freely while the surface is wet. Take your time. Squeegee out the water. Work from centre to edges firmly. Trapped water causes bubbles — be thorough. Remove the application tape. Peel slowly at a low angle once the water is cleared. Allow 24 hours to cure before rolling or racing. Pro tips + Apply to a rigged sail. A fully rigged sail held under tension gives a smooth, even surface. Avoid applying to a folded or rolled sail. Ideal temperature: 15–25°C. Cold adhesive bonds poorly. Very high heat makes it grip too fast. Avoid direct midday sun. Use the margin to align. The ~20mm background margin helps you line up square against batten pockets or panel seams. Press all edges firmly. Lifted edges are the most common cause of early peel — run your nail or a card around every edge after application. 24-hour cure before racing. Give the adhesive time to fully bond before the sail goes near water. Junior U17 athletes Junior U17 class rules do not require a full set — flags in particular are not needed at this level. Order individual items instead: iQFOil Sail Numbers — individual set iQFOil Name Strip — individual set iQFOil Nationality Flag — individual set (if required) A digital proof is sent for your approval before anything goes to print. Designed, printed and produced by windsurfers on the South Coast.