PLA Glow

Product Features Unique Glow in Low Light Conditions Comes with Basic Reusable Spool Diameter: 1.75mm +/- 0.03mm Cautions for Use A Hardened Steel Nozzle is required when printing Stainless Steel Nozzles NOT Compatible 0.2 mm nozzles NOT Compatible AMS 2 Pro, AMS HT & AMS Compatible, but can lead to faster wear AMS lite NOT Compatible Bambu PLA Glow PLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature - it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewelry, and various models that require a captivating glow effect. Unique Glow in Low Light Conditions Bambu PLA Glow incorporates a distinct additive: luminous powder, which imparts a special property to printed objects, causing them to emit a captivating glow in the dark. Accessory Compatibility Recommended Not Recommended Build Plate Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate / Hotend Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm Hotend with Stainless Steel Nozzle Glue Bambu Liquid Glue Glue Stick / AMS & AMS lite AMS AMS lite* * It is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance. RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Recommended Printing Settings Drying Settings (Blast Drying Oven) 55 °C，8 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 190 - 230 °C Bed Temperature (with Glue) 35 - 45 °C Printing Speed < 250 mm/s Physical Properties Density 1.26 g/cm³ Vicat Softening Temperature 56 °C Heat Deflection Temperature 55 °C Melting Temperature 155 °C Melt Index 23.3± 2.4 g/10 min Mechanical Properties Tensile Strength 32 ± 3 MPa Breaking Elongation Rate 8.6 ± 1.2 % Bending Modulus 2640 ± 130 MPa Bending Strength 76 ± 4 MPa Impact Strength 27.3 ± 2.2 kJ/m² Printing Tips • Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI. • Printing with a 0.2 mm nozzle is not recommended; instead, it is advised to use a 0.4 mm nozzle for optimal results. • The model's luminous intensity diminishes over time, but exposure to ultraviolet or sunlight for a brief period (approximately 2 hours) can rejuvenate its glow. However, prolonged or frequent irradiation may expedite PLA aging. • Not suitable for AMS lite: Utilizing AMS lite may result in high feed resistance and an increased risk of feed failure. Consider alternative methods such as pre-use drying for better outcomes.