Complete Boat Restoration Kit – Hull Cleaner, Rust Remover & Bottom Cleaner System

Complete Boat Restoration Kit – Hull Cleaner, Rust Remover & Bottom Cleaner System If you own a boat, you already know the routine. You pull the cover or shrink wrap off after winter storage and the boat doesn’t look “ruined” — but it doesn’t look ready either. The fiberglass inside the boat is dull, yellowed, or stained. The vinyl cushions have mold or mildew starting to show. Rust streaks have appeared under fittings. And the hull might have a dark waterline and seasonal buildup that wasn’t there when it went away. Even well-covered boats still need a full reset before launch season. That’s exactly what this system was built for. What boat owners actually notice first When the Wash Safe Supreme Cleaner is used on boats, the most immediate change isn’t just “cleaner surfaces” — it’s how much brighter everything becomes again. White fiberglass interiors and deck surfaces come back noticeably whiter. Vinyl cushions that had mold or mildew look renewed again after treatment. Surfaces that looked aged or stained start to look maintained again. This “white return effect” is one of the most consistent results reported after winter storage cleaning. Why boats need this kind of system after storage Even when covered, boats are exposed to: Moisture trapped under shrink wrap or covers Temperature swings that promote mold and mildew growth Metal oxidation that transfers rust onto surrounding fiberglass Organic buildup along hulls and waterlines during the previous season Salt residue and environmental film that settles into surfaces The result is not one problem — it’s multiple surface failures happening at once across different materials. Fiberglass. Vinyl. Metal. Hull surfaces. Each one behaves differently and needs to be treated differently. The system approach (how each surface is restored correctly) Instead of one general-purpose cleaner, this kit breaks boat restoration into three real-world cleaning jobs. 1. Interior Fiberglass & Vinyl Reset – Supreme Cleaner (3 lb) This is the “bring it back” step for the inside of the boat. Applied to fiberglass decks, interior panels, and vinyl seating, the Supreme Cleaner is designed to lift winter buildup, mold, mildew, and embedded staining. It does so with the power of sodium percarbonate, not bleach. When applied liberally and worked with a deck brush, it loosens contamination from both hard and soft surfaces at the same time. Recommended use (real-world method): Apply heavily with a deck brush. Lightly scrub while applying to work product into the surface. Allow to dwell for 45–60 minutes. Rinse thoroughly — ideally with a pressure washer, or a hose and brush if needed. What changes after this step: White fiberglass brightens noticeably Vinyl cushions lose mold and mildew staining Interior surfaces look renewed instead of aged Overall cabin/deck area looks “reset” after storage This is the step where most people say: “I didn’t realize how dirty it actually was until now.” 2. Rust & Metal Stain Removal – Get’s Rust Off (1 Gallon) Rust staining on boats almost always comes from metal fittings transferring oxidation into fiberglass over time. It doesn’t sit on the surface — it bleeds into it. This product is designed to chemically break down iron oxide staining and lift it from the surface without aggressive scrubbing that can damage gelcoat. It is especially effective on: Rust streaks under railings Fastener bleed marks Metal transfer stains on fiberglass 3. Hull & Waterline Cleaning – Boat Bottom Cleaner (1 Gallon) The hull and waterline show the story of the season. After months in the water, even well-maintained boats develop: A dark waterline band Algae and scum buildup Organic marine film bonded to the hull surface This cleaner targets that biological layer directly, breaking down the biofilm structure that allows buildup to cling to the hull. The result is a cleaner, more uniform hull surface with significantly reduced scrubbing effort. Why this system works better than “all-in-one” boat cleaners Most marine cleaners try to do everything in one step. In real conditions, that doesn’t match how boats actually age. Fiberglass interiors stain differently than hulls Vinyl grows mold, not rust Rust transfers from metal, not water Hull buildup is biological, not just surface dirt One formula can’t properly solve all of those without compromise. This system works because each product is designed for a specific material and type of buildup: Interior fiberglass + vinyl restoration Rust stain removal from metal transfer Hull and waterline biofilm removal What “clean” actually looks like with this system Not just washed — reset. White fiberglass comes back brighter. Vinyl looks renewed instead of stained. Rust marks disappear from fittings and surrounding surfaces. The hull loses its dark seasonal band. The entire boat looks like it’s been brought back to life after storage. Ideal use Spring launch after winter storage End-of-season haul-out cleanup Pre-sale detailing and presentation Heavy waterline and hull restoration Seasonal maintenance in saltwater environments