BioSurf Bioactive Microbial Surface Cleaner Concentrate

BioSurf™ is a concentrated bioactive surface cleaner that uses live Bacillus microbes to break down grease, grime, and organic buildup on counters, walls, tile, appliances, and sealed surfaces. The microbes activate on contact with moisture and organic matter, producing enzymes that digest the proteins, starches, fats, and oils conventional sprays leave behind. They continue working for days after the surface has dried — long after a traditional cleaner has stopped. No rinse. No residue. No bleach or quats. Sodium gluconate in the formula handles hard water naturally. Manufactured in Cape Coral, Florida by AlpiniaLabs LLC, a woman-owned, family-owned business founded in 2013. Quick facts Product type: Bioactive microbial surface cleaner (concentrate) Best for: Kitchens, bathrooms, food-prep surfaces, counters, tile and grout, walls, appliances, cabinet faces, backsplashes, vinyl, LVT, sealed stone (spot-test first) Format: Concentrate — mix with water in a spray bottle (bottle not included) Sizes available: 16 oz, 32 oz, 64 oz, 128 oz (1 gallon) pH: 6.0–7.5 (near-neutral) Shelf life: 12–18 months from manufacture (concentrate); pre-mixed solution best used within 24 hours Made in: Cape Coral, Florida, USA Manufacturer: AlpiniaLabs LLC — woman-owned, family-owned, founded 2013 Key features Live Bacillus microbial blend — digests organic soils on contact and continues working after the surface dries; built on the same category of Bacillus technology used in commercial wastewater and septic treatment. Sodium gluconate — sequesters calcium and magnesium ions in hard water; eliminates streaking, spotting, and surfactant deactivation; no separate rinse aid or water conditioner needed. EPA Safer Choice-approved surfactant — biodegradable nonionic wetting agent (Ecosurf-class) listed on the EPA Safer Choice Ingredients List. Fragrance-free — no synthetic fragrance, no masking agents, no essential oils. Formulated without: bleach, quaternary ammonium compounds (quats), phosphates, sulfates, optical brighteners, or persistent environmental contaminants. Drain and septic safe — supports the same microbial processes used in commercial septic systems. No-rinse design — low-foam chemistry and short ingredient panel allow surfaces to dry clean without film or residue. Concentrate format — one bottle makes dozens of ready-to-spray refills, reducing packaging waste and shipping emissions compared to pre-mixed sprays. Compatible surfaces Sealed countertops (laminate, butcher block with food-safe finish, quartz, solid surface), walls, ceramic and porcelain tile, grout, appliances (stainless steel, enameled steel, glass), cabinet faces, backsplashes, sinks, vinyl, LVT, sealed concrete, and most sealed natural stone. Spot-test natural stone (marble, granite, travertine) before regular use — the formula's near-neutral pH (6.0–7.5) is safe for most sealed stone, but verify with your stone sealer manufacturer. Ingredients Water, Nonionic Surfactant (biodegradable wetting agent, EPA Safer Choice approved ingredient), Proprietary Bioactive Microbial Cleaning Blend (Bacillus-based), Sodium Gluconate, Sodium Citrate, Citric Acid, Glycerin, Sodium Benzoate, Potassium Sorbate. The proprietary microbial blend is not disclosed at the strain level for competitive reasons. SDS documentation, EPA Safer Choice ingredient certification, and commercial-use case studies are available on request. Dilution rates Mix BioSurf™ concentrate with water in your own spray bottle. No rinse required after application. Light cleaning (daily touch-up): 1 oz concentrate per 32 oz water (1:32 ratio) Routine cleaning (weekly, counters, walls): 2 oz concentrate per 32 oz water (1:16 ratio) Heavy cleaning (grease, commercial buildup): 4 oz concentrate per 32 oz water (1:8 ratio) Spot cleaning (spills, stains, targeted areas): apply undiluted, wipe clean For peak microbial activity, use pre-mixed solution within 24 hours. Always shake the bottle before use. Important compatibility notes Spray bottle not included. BioSurf™ ships as a pure concentrate. Use any standard 16 oz or 32 oz spray bottle or pump sprayer. Do not mix with bleach or quaternary ammonium ("quat") disinfectants. These deactivate the live Bacillus cultures and neutralize the product's cleaning action. If your cleaning protocol includes a bleach or quat step, run BioSurf™ separately — never in the same bottle or on the same surface immediately after. Spot-test natural stone (marble, granite, travertine) before regular use. Keep out of reach of children. Store cool and dry, lid tightly closed. Avoid freezing. Why BioSurf™ vs conventional surface cleaners Conventional spray cleaners stop working the moment the surface dries. Bleach sprays leave chlorine residue and disrupt septic biology. BioSurf™ uses live Bacillus microbes that keep producing enzymes for days after application — as long as moisture and organic matter remain, the microbes continue digesting residue. The no-rinse, low-foam chemistry leaves no film or coating. The proprietary microbial blend is built on the same category of technology used in commercial wastewater pre-treatment and food-service facility cleaning, scaled down for residential use. About AlpiniaLabs AlpiniaLabs LLC is a woman-owned, family-owned manufacturer of biodegradable, bio-enzymatic, reef-safe cleaning and personal care products, based in Cape Coral, Florida. Founded in 2013, AlpiniaLabs operates across direct-to-consumer e-commerce and government/municipal contracting. The company holds SBA Women-Owned Small Business (WOSB) certification and active EPA Safer Choice certification. BioSurf™ is part of the AlpiniaLabs Biōm Collection alongside Bio Flör™ Microbial Floor Cleaner. SAM.gov UEI: UG8JESXH3M49. CAGE: 18FP7.