VAF DC2S Bookshelf Loudspeakers

The DC-2S is suitable in small to medium size rooms for great stereo reproduction or used in a home theatre application for front or surround channels. The new 130 mm natural fibre cone mid/bass driver incorporates a unique vented alloy chassis. Supported on a linear suspension and soft low damping rubber surround with a non-conducting fibre voice coil former. This driver has incredibly low noise and distortion. VAF have combined this with another unique driver for the higher frequencies. These are handled by a dual concentric diaphragm tweeter with a specialised central phase plug to control and give excellent on and off axis performance. This gives the DC-2S even more natural and accurate reproduction over a wider area in your room. Power handling as with all VAF speakers is excellent, maintaining very low distortion levels even at higher volumes. Important when you want to reproduce the full dynamic potential of your music or movie soundtrack. These unique drivers are housed in a solid hand finished double sided veneer cabinet with a front baffle up to 30mm thick. The front baffle precisely time aligns the bass and tweeter. The crossovers are hand-built, using air cored pure copper inductors wound in-house to exact tolerances. All components are matched and connected point-to-point, ensuring a more direct and pure signal path. Made by hand in VAF’s own manufacturing facility in Adelaide, every speaker is taken through an extensive process, uniquely made for you. Read the StereoNet Review of the VAF DC-2S Main Features & Specifications Design: 2 Way Front Ported Bookshelf Speaker Frequency Range: 45Hz ~ 23kHz Frequency Response: 50Hz ~ 21kHz +/-3dB Impedance: 4 Ohms (nominal) Sensitivity: 86dB (2.83V / 1m) Amplifier: Power up to 100 Watts per channel Available in Four Standard Stained Colours - Black Oak, Natural Oak, Jarrah Coloured Oak and Brown Oak Dimensions (WxHxD): 180 x 350 × 245 mm exclude grille. Grill Dimensions (WxHxD): 170 × 340 × 6 mm Weight: 5.75 kg each Manufacturer’s Warranty: 10 Years All Speakers are Built to Order with an Approximate 12 Week Wait Time Note: Features & Specifications Subject To Change Without Notice. E&OE.