Plans - Super Sport - F1 Seat V3 - Wood

About After 10 years our Super sport F1 seat has been updated based on customer requests. It's is more adjustable in terms of length and a new wheel mount which rotates for easy access. It's now easier to move the whole wheel base back and fourth or adjust the height. The pedals assembly also has height, angle and back fourth adjustment We used the ergonomic layout of a real F1 car to produce a authentic race position. The design is simple to build with no complex joints and very cost effective solution for Sim Racers who enjoy DIY. Materials One sheet of 3/4" (19mm) MDF 55 linear feet (17m) of 2" * 1" (50mm * 25mm) of beach or maple or pine, etc. New... Adjustable pedal angle, height & back forth Adjustable wheel angle, height & back forth Longer seat area STEP 1 - Ordering Choose the Plans, Digital or Physical. OSR will send you the digital plans normally within 24 hours. The digital plans are released using google drive, this process is 100% manual, so a little patience is sometimes required :-). It helps the process if you have a gmail account, but this is not essential. If you choose paper version these have a 10 day lead time. STEP 2 - Assembling & Cutting We suggest you use 1:1 scale paper plans and lay on wood to cut with a jigsaw. Wood Working Tools Minimum recommended required Jig saw Chop saw Drill Optional tools Router Table saw The assembly process is very straight forward, but you require basic wood working skills. Sorry, we do not provide a step by step assembly guide, we assume you have basic wood working skills. Legal Stuff... The plans are copyrighted and licensed for personal use only. The completed or partially completed sim rigs chassis is not permitted to be sold, resold, distributed, mass produced or used in any commercial fashion. The plans may not be reproduced or distributed in any manner.