HMG Thinner 2711 1lt

HMG Thinner 2711 is a low-odour, solvent-based thinner designed for use with selected HMG coating systems. It is used to adjust the viscosity of compatible paints and coatings for easier application, while helping maintain the correct flow and finish where HMG specifies Thinner 2711 in the relevant product datasheet. HMG lists the product code as TNR2711 and describes it as “a low odour thinner recommended for use in certain HMG systems.” It is commonly associated with HMG systems such as Nisocoat / Nisocoat 2, HMG 2K epoxy coatings, Epilife 2, Chromate Free Etch Primer, Epiprime, and EP2 epoxy primer systems. Supplier listings describe it as suitable for use with HMG 2K Epoxy and Nisocoat, and also list Epilife 2, Chromate Free Etch Primer, and some epoxy primers among compatible HMG products. Key details: flashpoint 41°C, VOC content 0.890 kg/L, store between 5°C and 25°C, keep cans sealed when not in use, and use within 12 months from delivery when kept in original sealed containers. Always refer to the SDS, product datasheet, and tin label before use. Safety note: the safety data sheet identifies Thinner 2711 as for industrial and professional use only and for surface coating applications. It is classified as a flammable liquid and vapour and may cause serious eye irritation, respiratory irritation, drowsiness or dizziness; it is also suspected of damaging the unborn child, may be fatal if swallowed and enters airways, and is toxic to aquatic life with long-lasting effects. Use good ventilation, avoid ignition sources, and wear suitable eye protection, gloves, and any respiratory protection required by the SDS or site risk assessment.