DisplayPort to HDMI over MPO Fiber System – 8K@60Hz, 4K@144Hz | Up to 300m (984ft) | DP 1.4 to HDMI 2.1 Detachable TX/RX

Made to order, takes 12-18 days to ship DisplayPort to HDMI Across the Room, Across the Building Your GPU has DisplayPort. Your display has HDMI. And they're not exactly neighbors. Standard DP-to-HDMI adapters work great at 3 feet. At 30, 100, or 300 feet? They fail quietly flickering, dropped signals, or nothing at all. This system solves that. Permanently. Run DisplayPort signal up to 300 meters (984 feet) with full 8K resolution, zero compression, and zero signal loss. Over fiber. What This System Includes 1. MPO Fiber Cable 7-core fiber optic cable ultra-slim at 3.0mm diameter Armored LSZH jacket: bend-resistant, flame-retardant, conduit-friendly Carries signal as light, not electricity immune to interference and zero signal loss over any distance 2. TX Adapter (Transmitter) DisplayPort end Connects to your DisplayPort 1.4 source: GPU, workstation, laptop dock Converts electrical DP signal into fiber light 3. RX Adapter (Receiver) HDMI end Connects to your HDMI 2.1 display: monitor, projector, TV, video wall Reconverts fiber signal back to HDMI zero compression applied How it works: Run the fiber cable through walls, conduit, or ceiling. Clip on the TX at the source end. Clip on the RX at the display end. Done. Why This Beats a Standard Active Fiber Cable Most long-distance fiber cables are one fixed piece bulky connectors, no flexibility, and if something breaks, you replace the entire run. This detachable system is different: Slim cable fits through tight conduits no bulky connectors during the pull Adapters snap on after installation clean, professional finish Replace just the TX or RX if needed not the whole cable run Mix and match lengths without rewiring For AV integrators and IT pros: this is the right way to build a permanent installation. What It Carries Resolution: Up to 8K @ 60Hz High Refresh: 4K @ 144Hz Color Depth: 4:4:4, 10-bit HDR: HDR10+, VRR, ALLM, QTF, QMS, CEC, HDCP 2.3, DSC 1.2 Audio: Dolby Atmos, DTS:X Bandwidth: Up to 32.4 Gbps Signal: Uncompressed — what goes in is exactly what comes out Built for Real Installations Armored 3.0mm cable rated for conduit and permanent in-wall runs LSZH jacket low-smoke, zero halogen, safe for commercial buildings Full EMI immunity fiber carries light, not electricity. No interference. Operates across extreme temperature ranges server rooms, outdoor enclosures, industrial environments Where This Gets Used Boardrooms & corporate AV: workstation to large-format display across the room Broadcast & live production: camera feed to monitor wall, hundreds of feet away Stadiums & arenas: control room to scoreboard or signage display Education: lecture hall PC to projector at the far end of the room Home cinema: equipment rack in closet, display mounted on opposite wall Simulation & training: high-fidelity graphics to multi-screen setups Technical Specifications Input Standard: DisplayPort 1.4 (DP 1.2 backward compatible) Output Standard: HDMI 2.1 (HDMI 2.0 / 1.4 backward compatible) Max Resolution: 8K @ 60Hz High Refresh Rate: 4K @ 144Hz Color Format: 4:4:4, 10-bit HDR / Protocols: HDR10+, VRR, ALLM, QTF, QMS, CEC, HDCP 2.3, DSC 1.2 Audio: Dolby Atmos, DTS:X Bandwidth: Up to 32.4 Gbps Fiber Type: MPO 7-core, A polarity, PC end face, F-F Cable Diameter: 3.0mm Cable Jacket: LSZH, Armored Max Distance: 300m / 984ft Signal Transmission: Uncompressed One cable. One direction. Unlimited distance. Install it once. It will outlast the displays on both ends.