PRMS360 Magnetic Sash 7.87" x 14"/200x360mm Frame for SEWTECH SC-1501 ST-1201 Commercial Embroidery Machines

Important Product Information This magnetic sash frame is designed for Sewtech SC-1501 and ST-1201 machines. Maximum embroidery size 360 x 200mm Compatible Machine Models: SC-1501 ST-1201 ▶ ▶ Package Contents 1 × Magnetic Sash Frame Main embroidery frame 4 × Large Magnets For primary fabric clamping 4 × Small Magnets For additional securing 1 × Magnet Lifter Tool Lever for easy magnet removal 1 × Installation & Operation Manual Complete guide Hooping Fabric in the Magnetic Sash Frame Fabric Requirements To ensure safe and stable embroidery: Do NOT use: Very stiff materials that cannot bend to the shape of the frame Highly elastic fabrics that shrink back strongly (the magnets can slip off) Very thick jackets or padded garments that may scrape the wide table or interfere with machine's movement Recommended maximum fabric thickness: Approx. 2 mm Special-coated fabrics (e.g., anti-slip backing) may not clamp securely even when thin. Removing the Magnets from the Frame Before you mount the frame onto the machine, remove all magnets from the frame. 1 Lift the Magnet Grip one edge of the magnet with your fingers and carefully lift it away from the metal surface. 2 If the Magnet is Difficult to Remove 1. Slide the supplied magnet lifter tool under one edge of the magnet. 2. Push the handle in the direction shown in the illustrations so the magnet peels off the frame rather than being pulled straight up. 3 Storage Tip After use, it is easier to handle the magnets if you store them with a piece of fabric sandwiched between the magnets and the frame. Attaching magnets directly to bare metal can make them difficult to remove due to the strong magnetic force.