Arccaptain LW1200 3 in 1 Handheld Laser Weder

Industrial Handheld Laser Welding Machine 1200W 3-in-1 Handheld Laser Welder LW1200 Weld, cut, and clean with one air-cooled workstation. No external chiller required. Simply plug in, set up, and start working in minutes. 1200W Fiber Laser Power 3-in-1 Weld / Cut / Clean 1000+ Preset Parameters 5-10X Faster Than TIG 1 Industrial Laser Welding Industrial-Grade Welding Performance — SPOT, PULSE, and Continuous The LW1200 delivers industrial laser welding in a handheld portable machine. Three dedicated modes cover every application — from precision spot repairs to high-speed production runs — on a wider range of metals than any conventional arc process. Perfect Welds in All Positions and Metals. Carbon Steel Stainless Steel Aluminum & Alloys Brass Galvanized Steel Magnesium Alloy Titanium Cast Iron Flat (1G / 1F) Horizontal table work Vertical (2G / 2F) Upright wall joints Horizontal (3G / 3F) Side-on plate and pipe Overhead (4G / 4F) Ceiling and underside Weld Thickness Range 0.012" — 0.16" Ultra-low heat input helps reduce distortion on thin metals. Weld materials from 0.012" to 0.16" thick with cleaner results, less warping, and less rework. 1,000+ Built-in Parameters 1,000+ built-in welding parameters for fabrication, automotive repair, and industrial maintenance. Simply select the material and thickness to get started. Reduce setup time, minimize trial-and-error adjustments, and achieve more consistent welding results. Welding speed 5–10× faster than TIG Complete more jobs in less time while reducing labor hours and post-weld cleanup. Capability TIG Welding MIG Welding LW1200 Laser Travel Speed Slow — 1–3 in/min Moderate — 6–15 in/min Up to 5–10× faster than TIG Heat-Affected Zone Wide Moderate Minimal — ultra-narrow HAZ Thin Sheet Distortion High risk Moderate risk Near zero Post-Weld Cleanup Usually required Usually required Minimal to none Setup Time per Job High — manual tuning Moderate Seconds — preset auto-load Safety Protection. Emergency stop, grounding protection, safety interlocks, contact-activated laser output, and included laser safety glasses for safer operation. 2 3-in-1 Laser System 3-in-1 Laser Welder — Weld, Cut, and Clean 01 Laser Welding SPOT, PULSE, and Continuous welding modes for carbon steel, stainless steel, aluminum, brass, and more. Weld materials from 0.012" to 0.16" thick up to 5–10× faster than TIG. Weld 02 Precision Laser Cutting Cut thin metal cleanly and accurately with less heat impact and less cleanup. Perfect for custom fabrication, repairs, and detailed metalworking projects. Cut 03 Laser Surface Cleaning Remove rust, paint, and oxide layers quickly without grinding wheels or chemical strippers. Minimize surface damage and increase cleaning efficiency. Clean 3 Air-Cooled Air-Cooled Mobile Workstation This portable laser welding machine combines an integrated air-cooled design with plug-and-play convenience. No external chiller required. Integrated Air Cooling The cooling system is built directly into the all-in-one enclosure. No external water chiller unit. No hoses to connect or drain. No coolant level to check. Heavy-Duty Caster Wheels Easily move the workstation between workstations and job areas. No forklift required—just roll it where it's needed and start welding. Plug In and Start Welding Standard 220V input. No custom wiring installation required in most shop environments. No chiller warmup sequence. Complete Shop Flexibility Move the portable laser welding machine wherever it's needed. No reinstallation, no complicated setup, just plug in and get to work. Technical Specifications LW1200 Specifications Laser Type Fiber Laser Rated Power 1200W Welding Thickness Range 0.012" – 0.16" (0.3mm – 4mm) Welding Modes SPOT / PULSE / Continuous Compatible Materials Carbon Steel, Stainless Steel, Aluminum & Alloys, Brass, Galvanized Steel, Magnesium Alloy, Titanium, Cast Iron Functions Welding / Cutting / Cleaning (3-in-1) Cooling System Air-Cooled — no external water chiller required Mobility Integrated heavy-duty caster wheels Built-in Parameters 1,000+ verified preset programs Input Power 220V / 50–60Hz Wire Feed System Integrated Oscillation Wobble Head Adjustable width and frequency Weld Positions Flat / Vertical / Horizontal / Overhead (all positions) 3-in-1 industrial laser welder Air-cooled. Preset-guided. Weld, cut, and clean from one station.