CarPro WheelX Wheel Cleaner | Automize Spray. Dwell. Rinse. Wheels Done. CarPro WheelX is a ready-to-use, fast-acting wheel cleaner that combines iron removal and heavy-duty cleaning into one step across wheels, calipers and arches. Most wheel routines are two products deep. Iron remover, then degreaser. WheelX collapses that into a single reactive pass — it breaks down bonded ferrous particles from brake dust while simultaneously cutting the road grime, oil and grease that a pure iron remover leaves sitting there. Slightly acidic at around pH 5.7, it's strong on contamination but formulated to be safe on OEM, painted, powder-coated, chrome and CQUARTZ-coated wheels, and CarPro state it's safe on carbon-ceramic brakes when used as directed. It'll also strip old, failing sealant off wheels and calipers, which makes it the natural prep step before coating. Iron Remover and Cleaner in One Dissolves embedded brake dust and lifts road grime, oil and grease in a single application instead of two separate products. Minimal Agitation Needed The reactive formula does most of the work chemically — light brushwork and pressure rinsing handle the rest. Broad Finish Compatibility Safe on OEM, painted, powder-coated, chrome and CQUARTZ-coated wheels, plus calipers, wheel wells and undercarriage. Coating Prep in the Same Step Removes old sealant and contamination from wheels and calipers, leaving a clean surface for a fresh wheel coating. 🛠️ How to Use 1 Spray Work in shade with the wheels cool to the touch. Use ready-to-use, undiluted, and cover the face, barrel, calipers and wheel wells generously. 2 Dwell Give it a short dwell to react and break down contamination. Never let it dry on the surface. 3 Agitate & Rinse Agitate heavily soiled areas with a soft wheel brush or wheel mitt, then rinse thoroughly and promptly with plenty of water. Reference Points Type Ready-to-use one-step wheel cleaner and iron remover Dilution None — diluting reduces effectiveness pH Around 5.7, slightly acidic Safe On OEM, painted, powder-coated, chrome and CQUARTZ-coated wheels; carbon-ceramic brakes when used as directed Not For Bare or raw aluminium — discolouration may occur Dwell Time Roughly 1–2 minutes, rinsed off within 5 minutes Dwell times are reference points, not a formula. Do not use in direct sunlight or on hot surfaces, never allow the product to dry, and do not mix with other chemicals. CarPro advise against use on bare aluminium and recommend caution and an inconspicuous test on anodized finishes. Use eye and skin protection, and refer to the manufacturer's label for current guidance. One product, one pass, four wheels. Order now for quick delivery all over Pakistan.