2-Pack OVONIC Rebel Series 11.1V 6000mAh 100C 3S Softcase LiPo Battery Pack with EC5 Connector for ARRMA 3S and 6S RC Vehicles

Overview High-speed 1/7 and 1/8 scale RC speed-runners and 6S street bashers require stable voltage maintenance and high continuous amperage under rapid throttle transitions. Using lower C-rated or insufficient capacity battery packs can result in power sag, thermal ESC limits, and shorter driving sessions. OVONIC Rebel Series 11.1V 6000mAh 100C 3S Softcase LiPo Battery Pack is engineered specifically for high-power 1/10 to 1/5 scale RC vehicles, speed-run platforms, and dual-battery 6S setups. Featuring a manufacturer-rated 100C continuous discharge rate (200C burst) and a 6000mAh capacity, this pack provides strong acceleration punch and extended runtimes. Designed with a lightweight softcase construction and pre-fitted with a high-current EC5 connector, this 2-pack combo is optimized for running in series to power 6S (22.2V) ARRMA BLX platforms or individually in 3S models. (Note: This is a softcase battery pack. For extreme off-road bashing on rough terrain, verify your battery compartment lining or consider hardcase options to protect against chassis impacts.) Primary Applications & Compatibility This 3S (11.1V) battery pack features an EC5 main plug and requires a battery compartment measuring at least 132 × 44 × 33 mm: ARRMA 6S BLX Vehicles (Configured in Series - 2 Packs Required for 6S): Ideal for high-speed street and speed-run models including the ARRMA Felony 6S BLX, Limitless, Infraction 6S BLX, Mojave 6S BLX, Kraton 6S BLX, Talion 6S BLX, Outcast 6S BLX, and Notorious 6S BLX. ARRMA 3S BLX 1/10 Scale Models (Single Pack Use): Compatible with 3S setups including the Granite 4x4 3S, Senton 4x4, Typhon 4x4 3S, Big Rock 4x4 3S BLX, and Outcast 4x4 (check battery tray clearance for softcase installations). Multi-Brand 1/8 & 1/10 Scale RC Platforms: Fits Traxxas, Losi, and Team Associated models rated for 3S 11.1V power with EC5 connectors. Key Features Rated 100C Continuous Discharge: Supports continuous high-amp output with a 200C peak burst rate, maintaining throttle response during top-speed runs and heavy loads. 6000mAh Energy Capacity: Delivers extended operational runtimes per charge cycle, allowing for longer speed runs or track sessions between recharges. Lightweight Softcase Construction: Reduces overall vehicle weight compared to traditional hardcase packs, offering an optimized power-to-weight ratio for on-road speed applications. Factory-Fitted EC5 Connector: Pre-installed with gold-plated EC5 power plugs for low-resistance power delivery to high-draw brushless ESCs. Standard JST-XH Balance Port: Equipped with a standard JST-XH balance lead for precise cell voltage balancing on all standard LiPo chargers. Specification Brand: OVONIC Series: Rebel Series Battery Type: Lithium Polymer (LiPo) Cell Configuration: 11.1V / 3S1P / 3 Cells Capacity: 6000mAh Nominal Voltage: 11.1V Discharge Rate: 100C Continuous (200C Peak Burst) Total Energy: 66.6Wh per pack Main Connector Type: EC5 Connector Balance Connector: JST-XH Case Type: Softcase Dimensions: 132 × 44 × 33 mm (±5mm variance) | 5.20 × 1.73 × 1.30 in Net Weight: 412 g (±20g variance) | 0.91 lbs (per pack) Package Quantity: 2-Pack What's in the Box 2 × OVONIC Rebel Series 11.1V 6000mAh 100C 3S Softcase LiPo Batteries with EC5 Plug 2 × OVONIC Brand Stickers 1 × User Manual Safety & Operating Guidelines Tray & Voltage Check: Confirm your ESC supports 11.1V (3S) per pack (or 22.2V / 6S when running two packs in series), uses an EC5 connector, and accommodates dimensions of 132 × 44 × 33 mm. Softcase Care: Ensure the battery tray is free of sharp edges, rocks, or debris that could puncture the softcase wrapping during high-impact driving. Charging Instructions: Charge exclusively using a dedicated LiPo balance charger on 3S balance mode. Cease charging immediately when each individual cell reaches 4.20V. Never leave charging batteries unattended. Low-Voltage Protection: Configure your ESC low-voltage cutoff (LVC) to at least 3.4V or 3.5V per cell. Do not allow cell voltage to fall below 3.20V under load. Storage Recommendation: For storage exceeding 48 hours, maintain a storage voltage between 3.80V and 3.85V per cell in a cool, dry place inside a fire-retardant LiPo safety bag.