GTECHNIQ GT1 Ceramic Coating Kit | 12 Month Protection

The GTECHNIQ GT1 Ceramic Coating Kit is an entry-level, all-surface 12-month ceramic protection system. Designed for simple, single-layer application on paint, PPF, trim, wheels, and glass - and can even be applied outdoors in the shade without prior machine polishing. Key Features & Specifications Lifespan: Up to 12 months on paint, wheels, trim, and non-wiper glass Application Surfaces: Paintwork, vinyl wraps, PPF, exterior plastics/trim, glass, and wheel faces Environment: Can be applied outdoors or outside of a controlled indoor garage setup Polishing Requirement: Not required - panel prep focuses on a thorough wash and chemical decontamination rather than heavy correction Why Use GTECHNIQ GT1? GT1 delivers trusted Gtechniq ceramic coating performance in a fast, single-layer application. The advanced ceramic formula chemically bonds to the surface, creating a durable layer of protection that resists swirl marks, delivers outstanding hydrophobic performance, and tight water beading. Dirt releases more easily, keeping surfaces cleaner for longer. GT1 is a true all-surface coating - apply it to paintwork, PPF, trim, wheels, and glass with a single product. In the swept area of a windscreen, durability is reduced to several months due to wiper abrasion. Kit Contains 1x 50ml GT1 Ceramic Coating 1x 100ml Panel Wipe 1x MF1 Microfibre Buff Cloth 4x MF6 Microfibre Cloths 1x AP5 Microfibre Applicator Pad 1x Pair of Protective Gloves 1x Application Guide Application Steps Before you begin: Park the vehicle out of direct sunlight and ensure the ambient temperature is above 5°C. Working in the right conditions will make the process smoother and help you achieve the best finish. Step 1 - Deep Clean Your Car: Even if your car is brand new, carry out a full decontamination wash before applying any protection. This removes transport residue, fallout, and bonded contaminants. You don't need to use Gtechniq products for this stage - what matters is that the surface is completely clean and contaminant-free. Ensure the vehicle is fully dry before moving on. Step 2 - Panel Preparation: Put on the supplied gloves and keep them on throughout. Spray Panel Wipe onto the MF1 Microfibre Buff Cloth (lighter grey) and wipe down each panel one at a time. Ensure all streaks and residue are fully removed before progressing to Step 3. Step 3 - Apply the Coating: Apply GT1 evenly to the applicator pad - fully covered but not overloaded. Start at the top of the vehicle and work down, using smooth overlapping passes (side to side, then up and down) for even coverage. Flash time: Allow the coating to sit until it shifts from a smooth film to visible beading - around 30 seconds in warm/humid conditions, up to 60 seconds in cooler/drier conditions. Watch the coating, not the clock. Residue removal: Using a clean MF6 cloth (darker grey), gently remove residue with light, controlled movements - no pressure needed. Follow immediately with a second clean MF6 cloth to buff to a clear, high-gloss finish. Inspection: Under good lighting (use a torch if needed), check each panel to ensure all residue is removed and the finish is even. Continue: Re-prime the applicator pad as needed and work panel by panel. Once all painted surfaces are done, move on to windows, then trim, then wheels. Step 4 - Cure: Allow the coating to cure for 7 days before washing the vehicle. This ensures full bonding and maximum durability.