Luminor Blackcomb-HO 4.1 Trio Rack Ultraviolet (UV) System LBH4-Z122

Description The Luminor LBH4-Z122 is a Blackcomb-HO 4.1 Trio Crossover rack system, combining three filtration stages with high-output UV disinfection on a single pre-plumbed bracket. Rated for 15 gallons per minute at the 30 mJ/cm2 industry standard dose, it pairs a cleanable mesh strainer with sediment and carbon filtration. The horizontal UV chamber minimises installation height, and the reversible design allows feedwater to enter from either side. Resources Luminor Blackcomb Manual - English Luminor Blackcomb Operations & Installation Instructions Tech Specs Flow Rate: 15 GPM @ 30mJ/cm2 1st Filter Housing: 10 inch mesh strainer, 90 micron / 150 mesh (LC-10MS), cleanable 2nd Filter Housing: 20 inch, 5 micron sediment (LC-20S) 3rd Filter Housing: 20 inch, high-capacity carbon (LC-20AC) Electrical: 90-265V / 50-60Hz Power (Watts): 57W (48W @ 230V) Lamp Watts: 45W, high output, 10,000 hour rated life Chamber Material: 316L Stainless Steel, A249 pressure rated tubing, polished and passivated Reactor Dimensions: 3.5" x 20.0" (8.9 x 50.8 cm) Controller: RCHO-4.12 Connection Size: 1" MNPT Operating Pressure Range: 10-100 psi (0.7-6.8 bar) Operating Temperature Range: 2-40C (36-104F) Replacement Lamp: RL-420HO / Replacement Sleeve: RQ-420 In the Box 1 x Luminor LBH4-Z122 Trio Rack UV System, pre-assembled Warranty Reactor: Ten (10) years Electronics: Three (3) years UV Lamp: One (1) year Quartz Sleeve: One (1) year This warranty is for manufacturer's defects only, and applies to the original purchaser. It does not cover damage from freezing, outdoor installation, water ingress into the controller, use of non-Luminor lamps or sleeves, or operation outside Luminor's published water quality limits.