StoneTech™ Exterior Heavy-Duty Stone & Masonry Sealer - 1 Quart

PLEASE NOTE PRODUCT NOT FOR SALE IN CALIFORNIA Easy to Use. Inhibits Efflorescence Preserves Natural Look. Great for Building Facades. Excellent Water Repellency. Non Yellowing StoneTech™ Heavy-Duty Exterior Stone & Masonry Sealer from Bane-Clene® Corp. STONETECH Heavy Duty Exterior Sealer is a solvent based, natural look sealer which offers heavy duty protection, water repellency and weather resistance to exterior natural stone and masonry surfaces. A superior water repellent and stain protector for exterior stone: Brick Pavers Granite - Cleaning, Care and Protection Marble - Polishing, Care, Sealing Limestone Saltillo and Mexican Tile Sandstone and Flagstone Slate Terra-Cotta Terrazzo Travertine Advantages and Benefits to Using Exterior Stone Sealer: Formulated with advanced, water-based, silicone technology that protects against water-based stains. Lasts for years even under extreme sunlight. Easy to Use. Inhibits Efflorescence Preserves Natural Look. Great for Building Facades. Excellent Water Repellency. Non Yellowing. Properties & Specifications: Restrictions on Use: Professional Use Only. Keep out of the reach of children. Keep cool. Use only outdoors or in a well-ventilated area. Form: Liquid. Appearance: Clear. Color: Colorless. Size: Quarts. Manufacturer: StoneTech™ Professional™ / Laticrete International (formerly DuPont). Country of Manufacture: United States of America. Storage: Store in a well-ventilated place. Keep container tightly closed. Odor: Solvent. Solubility: Not soluble in water. Use pH: Not applicable with solvents. Coverage: 200-1200 sq ft per gallon square feet per gallon, depending on porosity of stone. Expected Wear (With Proper Care): 5-10 years on exterior surfaces. For optimal results, reapplication is recommended every 3-5 years for exterior surfaces or 5-7 years for interior applications. Flash Point: 104°F. (Closed Cup). VOC content: 724 grams/liter. Directions for Using Heavy-Duty Exterior Stone & Masonry Sealer: Keep out of reach of children. Read label directions and cautions before using. Wear protective eyewear and rubber gloves. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry, and free of waxes and coatings and loose debris. Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated. Liberally apply 1-2 coats with a brush, paint roller, or solvent resistant low pressure sprayer. On porous surfaces the first coat will soak in considerably. Additional coats will cover approximately double the previous coat. Highly porous material will need longer cure time between coats. Allow time to saturate, about 5-15 minutes per coat. Wipe off any excess residue prior to complete drying. If, after drying, a light haze appears, lightly dampen a clean towel with Heavy Duty Exterior Stone & Masonry Sealer and wipe surface to remove. Clean equipment with mineral spirits or Saf-T-Solv™. For maximum oil and water repellency, allow Heavy Duty Exterior Stone & Masonry Sealer to cure for 24 hours, then apply two coats of StoneTech Professional Impregnator Pro™ as per label directions. Do not walk on surface for a least 4 hours. Full cure is achieved in 24-72 hours. Routine Cleaning of Exterior Stone, Brick and Masonry: To maintain the stone’s natural beauty, clean surface as needed with StoneTech Professional Revitalizer or All Purpose Stone Cleaner. Heavy Duty Cleaning of Exterior Stone, Brick and Masonry: Pre-clean with StoneTech Professional Klenz All™ Heavy Duty Stone, Tile and Grout Cleaner. Additional Stone, Ceramic and Porcelain Tile & Grout Information: Dates for Training Classes for Cleaning Professionals Efflorescence Granite Limestone Marble Mexican and Saltillo Tile Sandstone Serpentine Slate StoneTech™ Travertine VIDEO: How to Protect and Seal Natural Stone like Marble, Limestone, Granite, Travertine VIDEO: How to Seal and Protect Exterior Stone & Masonry VIDEO: How to Seal Exterior Stone & Masonry - from Bane-Clene StoneTech Heavy-Duty Exterior Stone & Masonry Sealer from Bane-Clene provides “natural look” protection for exterior natural stone & masonry. Specifications Coverage & Expected Wear Depending on type of stone, porosity, texture of surface and method of application - Coverage Approximately 200 - 1,200 sq. ft. per gallon. Expected Wear (With Proper Care): 5-10 years on exterior surfaces. For optimal results, reapplication is recommended every 3-5 years for exterior surfaces or 5-7 years for interior applications. Safety Data Sheets Link ST 61237 SDS (PDF)