TAG Extreme Recovery Towbar And Wiring Kit For LDV T60 & T60 Max Styleside Tub (07/2017 - 03/2024)

Extreme Recovery Towbar And Wiring Kit For LDV T60 & T60 Max Styleside Tub (07/2017 - 03/2024) by TAG This TAG Extreme Recovery (XR) Towbar and wiring kit is built for LDV T60 and T60 Max Styleside tub models with a rear step, covering build dates from 07/2017 to 03/2024. It pairs the same Australian-built recovery towbar used across the T60 range, rated to 3500kg towing capacity and 350kg ball weight, with a direct-fit wiring harness so trailer and caravan lights are ready to go without a separate wiring job. The towbar carries two WLL 4000kg load-rated recovery points in its 3-piece side-arm design, genuine rated recovery points rather than a standard tow ball. The wiring harness is plug-and-play, bench tested and rated to ADR standards, so it integrates without tripping up trailer stability control, lane collision systems or parking sensors on the tow vehicle. Kit includes the towbar, TAG's direct-fit wiring harness and a 7 pin flat socket on the vehicle side. Features Extreme Duty Reinforced Crossbar Two WLL 4000kg load-rated recovery points with bevelled edges suited to soft-shackles Flush chassis-mounted profile for improved departure angles and offroad clearance Textured powder coated finish Dual top-mounted trailer and Anderson plug mounts Class 4 towbar with 50mm square hitch receiver TAG Limited Lifetime Warranty Wiring harness is plug-and-play, bench tested and rated to ADR standards, with no special tools or soldering required Compatible with Trailer Stability Programming (TSP), Lane Collision Avoidance systems and Park Distance Controls (PDC) Does not interfere with brake lights, turn signals or live wire connections A towbar is a safety-critical item and fitment can vary between vehicles even within the same model. We recommend having your towbar and wiring harness installed by a professional towbar or vehicle accessory fitting workshop. Towbar Specifications Towbar Class: Heavy Duty (4x4 Recovery) Towbar Capacity [kg]: 3500 Ball Weight [kg]: 350 Recovery Load-tested: 4000kg WLL Recovery Points: 2 Hitch Type: 50mm Square Hitch Receiver Tow Ball Mount: L4045TXR Coating: Textured Powder Coated Exposure: Partially concealed Bumper Removed During Fitment: Yes Bumper Cut Out Required: No Fitting Time [min.]: 60 Wiring Specifications Wiring Option: Direct Fit ECU Wiring Type: Direct Fit Style: 7 Pin Flat Type: Plugs & Sockets Includes Trailer Plug: Yes Diagnostic Coding: No LED Support: yes Reverse Sensor Cut Off: Automatic Reed Switch: Normally Open Circuit What's Included TAG 4x4 Recovery Towbar TAG Direct Fit Wiring Harness TAG 7 Pin Flat Socket (Vehicle Side) Documentation Towbar Installation Manual (PDF) Wiring Harness Installation Manual (PDF) Only need the towbar, not the wiring? See the towbar-only version. Vehicle Applications This towbar and wiring kit is listed against the following 10 vehicle records on the supplier's fitment guide. Always confirm exact fitment for your specific vehicle before ordering. Make Model From To Body Series Engine Variant Drivetrain LDV T60 07/2017 03/2024 Ute SK8C 0.0L | Electric – RWD LDV T60 07/2017 03/2024 Ute SK8C SC20M218Q5 | 2.0L | Diesel DTT AWD LDV T60 07/2017 03/2024 Ute SK8C SC20M218Q5 | 2.0L | Diesel DTT RWD LDV T60 07/2017 03/2024 Ute SK8C SC20M163Q5 | 2.0L | Diesel – AWD LDV T60 07/2017 03/2024 Ute SK8C SC20M163Q5 | 2.0L | Diesel – RWD LDV T60 07/2017 03/2024 Ute – D20 | 2.0L | Diesel TRAILRIDER 2 Automatic/Manual 4WD LDV T60 07/2017 03/2024 Ute – SC28R150Q5 | 2.8L | Diesel LUXE, PRO, TRAILRIDER, Automatic/Manual 4WD LDV T60 07/2017 03/2024 Ute – SC28R150Q5 | 2.8L | Diesel Pro| Luxe 4WD LDV T60 07/2017 03/2024 Ute SK8C SC28R150Q5 | 2.8L | Diesel – RWD LDV T60 07/2017 03/2024 Ute SK8C SC28R150Q5 | 2.8L | Diesel – AWD Frequently Asked Questions What's included in this kit? The kit includes the TAG 4x4 Recovery Towbar, TAG's direct-fit wiring harness and a 7 pin flat socket on the vehicle side. Does the wiring harness affect my vehicle's safety systems? No. The harness is compatible with Trailer Stability Programming, Lane Collision Avoidance and Park Distance Controls, and it does not interfere with brake lights, turn signals or the live wire connection. Do I need to solder anything to fit the wiring harness? No. It's a plug-and-play design, bench tested and rated to ADR standards, with no special tools or soldering required. What plug type does this wiring kit use? A 7 pin flat plug and socket, which is the standard trailer wiring connection for basic lighting circuits. If your trailer or caravan uses a different plug type, you may need an adaptor. I only need the towbar, not the wiring. Is that available separately? Yes, see the towbar-only version, which carries the same towbar rating without the wiring harness. Which LDV T60 build dates does this kit suit? This kit is listed for T60 and T60 Max Styleside tub models from 07/2017. Check the vehicle applications table below to confirm your specific build date and drivetrain before ordering. Is professional installation recommended? Yes. A towbar and wiring harness are safety-critical items, and fitment can vary between vehicles even within the same model. We recommend installation by a professional towbar or vehicle accessory fitting workshop. What's the towing and recovery rating of the towbar in this kit? The towbar is rated to 3500kg towing capacity and 350kg ball weight, with two WLL 4000kg load-rated recovery points.