Data Center Network Prep & Install Kit

Description Data Center Network Prep & Install Kit These comprehensive network prep and installation kit built for data center technicians handling structured cabling work in data center types including traditional set ups like edge & enterprise, hyperscales, colocations. This kit covers every stage of a network cabling installation, from pulling cable through conduit, raised floors, and drop ceilings to stripping, terminating, dressing, and tracing completed runs across dense patch panels and overhead trays. Reusable hook and loop cable ties keep bundles organized and reconfigurable as the environment grows and changes, and a rugged technician backpack keeps everything field-ready across large data hall deployments and multi-floor infrastructure builds. Built for technicians working at pace through every stage of a copper network cabling installation, from pulling and stripping through termination, organization, and tracing, the TK-DC05 eliminates the need to source tools separately across large data hall deployments and multi-floor infrastructure builds. Features Features Pull low-voltage network, COAX, and electrical cable with CP-475 through conduit, raised floors, and overhead trays in data center environments, with surface protection for safe routing with CPF-215 through drop ceilings in server rooms and colocation facilities. Use the JIC-685 lineman plier for additional support needed with fishtape. Pull parallel cable runs with CCB-2534 and organize with CTS-812/100 into clean, evenly spaced bundles at patch panels and switch terminations , producing structured cabling layouts that are faster to trace and easier to maintain across the life of the installation. CST-1i strips cable jackets up to CAT 8 cleanly before termination, protecting conductor integrity. JIC-7858 provides 2 additional stripping capabilities in addition to flush cuts for cable ties. Trim and crimp RJ45 connectors on cables up to CAT 7 in a single pass with UC-4511, delivering consistent crimp quality across management cabling, console runs, and structured cabling installations throughout the data center. Trace and identify unlabeled cable runs with the CM-100 cable mapper, then use the TETP-901 tone and probe kit to pinpoint the exact cable at the panel or termination point, eliminating guesswork across crowded overhead trays, raised floors, and dense patch panels. Stay safe and productive during rack work with SOL-F1 rechargeable lighting for low-light aisles and BP-100 heavy-duty backpack for organization and quick access. Optional Add-Ons CC-2721 - Steel Cable Caddy for 16" X 20" Wire Spools CC-2721WS - Steel Cable Caddy, 21" Wide with Wheels & Strap CC-2726 - Steel Cable Caddy, 26" Wide CC-2726WS - Steel Cable Caddy with Wheels & Pull Strap, 26" Wide CC-5442 - Double Decker Steel Cable Caddy, 21" Wide CRD-10 - Cable Reel Dispenser, 10" Diameter JIC-22035 - Spudger, Yellow Plastic MF-25/10 - Magtime Magnetic Cable Holder, 10 pcs MF-25/25 - Magtime Magnetic Cable Holder, 25 pcs PoE-1 - POE & Cable Testing Tool RJ45-5100 - RJ45 Cat5/5e Pass-Through Connectors, 100 Pcs RJ45-525 - RJ45 Cat5/5e Connectors, 25 pcs RJ45-550 - RJ45 Cat5/5e Pass-Through Connectors, 50 Pcs RJ45-6100 - RJ45 Cat6 Pass-Through Connectors, 100 Pcs RJ45-625 - RJ45 Cat6 Connectors, 25 pcs RJ45-650 - RJ45 Cat6 Pass-Through Connectors, 50 Pcs RJ456A-SC - Shielded RJ45 Connector with Crimp Tail for Cat6A Cable, Pack of 100 RJ456AUS-100 - Unshielded RJ45 Pass-through Connector for CAT6A Cable, Pack of 100 TDR-100 - Network Cable Tester and TDR UC-4511 - RJ45 & RJ11/12 Mod Pass-through Crimper with Tail Crimping Slots PLKJ-1 - Keystone Jack Plier PLCR-8 - Keystone Jack and Field Termination Crimper Specifications Spec Sheet TECHNICAL SPECIFICATIONS DIMENSIONS 14.76IN X 7.4IN X 18.7IN WEIGHT 14.904LBS DATA CENTER TYPE TRADITIONAL (EDGE, ENTERPRISE, COLOCATION), HYPERSCALE (CLOUD, LARGE-SCALE) ENVIRONMENT TYPE INSIDE PLANT (ISP) SOLUTIONS FOCUS CABLING INFRASTRUCTURE: NETWORK LIFECYCLE PHASE ALL PHASES (PREP & INSTALL, TESTING & COMMISION, REPAIR & MAINTENANCE) CAPABILITIES BEND, CABLE TESTING, CRIMP, CUT, CRUSH, GRIP, ILLUMINATE, PULL, STRIP, STORE & CARRY CABLE MANAGEMENT CAPABILITIES BUNDLING: UP TO 2” (5.08) MM PULLING, CEILING PROTECTION, ORGANIZING: MOST CABLES UP TO 0.36” (9.14 MM) CABLE TESTING CAPABILITIES TONE & PROBE, WIRE MAPPING, TELEPHONE POWER CRIMPING CAPABILITIES RJ11, RJ12, AND RJ45 PASS-THROUGH, SHIELDED AND UNSHIELDED CONNECTORS ON CAT3, CAT5, CAT5E, CAT6, CAT6A, CAT7 CABLES, TOOLESS KEYSTONE JACK AND FIELD TERMINATION CONNECTORS CUTTING CAPABILITIES DIAGONAL CUT: WIRE ILLUMINATING CAPABILITIES 250-1500 LM, 4-8 HRS PULLING & GRIPPING CAPABILITIES KEYSTONE JACKS, GENERAL MATERIALS STEEL FISHTAPE: 1/8-1/4” (3.18-6.35 MM) REMOVAL CAPABILITIES RING: PVC, PLENUM, AND OTHER TYPES OF INSULATION STRIPPING: PVC, RUBBER, PE STRIPPING CAPABILITIES WIRE: 18-22 AWG SOLID-26 AWG STRANDED, NETWORK CABLE (CAT3, CAT4, CAT5, CAT5E, CAT6, CAT6A, CAT7, CAT7A, CAT 8, TP, UTP, STP): 1/8- 3/8” (3.2 MM TO 9.6 MM) UPC # 810215350582 What's in the Box What’s in the Box Qty 1 - Data Center Network Prep & Install Kit KIT INCLUDES BP-100 TECHNICIAN’S TOOL BAG BACKPACK CCB-2534 CABLE COMB® CABLE ORGANIZING TOOL SET CM-100 JONARD TOOLS® CABLE MAPPER PRO CP-475 PULLEY FOR LOW VOLTAGE ELECTRICAL, NETWORK, & COAX CABLES (2 PACK) CPF-215 CABLE FUNNEL DROP CEILING PROTECTOR CST-1I CYCLOPS WIRE STRIPPER CTS-812/100 HOOK & LOOP CABLE TIE STRAP, 8” X 1/2”, PACK OF 100 JIC-685 LINEMAN’S PLIERS WITH FISH TAPE PULLER & CRIMPER JIC-7858 TELECOM DIAGONAL CUTTING PLIERS, 6-1/4” PPA-7 PUMP PLIERS WITH AUTOMATIC ADJUSTMENT, 7” SOL-F1 SOLIS™ RECHARGEABLE TACTICAL FLASHLIGHT TETP-901 CABLE TESTER TONE & PROBE KIT+ W/ ABN UC-4511 RJ45 & RJ11/12 MODULAR PASS-THROUGH CRIMPER WITH TAIL CRIMPING SLOTS