Seeed Studio XIAO ESP32-C5 – dual band WiFi 6, BLE 5, 8MB PSRAM, 8MB FLASH, battery charge supported
Компактна развойна платка с ESP32-C5 микроконтролер, поддържаща dual-band Wi-Fi 6 (2.4GHz and 5GHz), Bluetooth 5 LE и Thread/Zigbee (IEEE 802.15.4). Комплектът съдържа: Seeed Studio XIAO ESP32-C5 – 1 бр. WiFi/BT антена – 1 бр. Конектори за GPIO портовете Важно: В комплекта няма USB кабел! USB кабел за връзка с компютър – USB-A USB-C Характеристики: Микроконтролер: ESP32-C5HR8 RISC-V 32-bit single-core processor, up to 240MHz with built-in 320KB ROM, 384KB HP SRAM, and 16KB LP SRAM FLASH: 8 MB PSRAM: 8 MB Dual-band Wi-Fi 6: 2.4 GHz и 5 GHz (802.11ax) Bluetooth 5 (LE) IEEE 802.15.4 – Zigbee 3.0 и Thread Захранване: USB 5V, или 3,3V на обозначените изводи или от Li-Po батерия 3,7V Вградено зарядно за Li-Po батерия 3,7V, осигуряващо до 100mA (Важно: изводите за Li-Po батерия се намират от долната страна на платката! Няма предвиден конектор за батерия, а само изводи където да се запоят проводниците на батерията!) Работно напрежение I/O портове: 3,3V GPIO портове: 11 броя – PINOUT Поддържа USB native, UART, I2C, SPI, I2S и др. Има USB-C конектор, 2 светодиодa (1 user LED, 1 charge LED) и два бутона (1x reset, 1x boot) Програмира се през USB с Arduino IDE, с MicroPython и др. Размери платка: 21mm x 17,5mm WiFi/BT антена: външна, PCB, uFL конектор Допълнителна информация: Seeed Studio XIAO ESP32-C5. Подробно описание Seeed Studio XIAO ESP32-C5 Wiki. Ръководство Pinout PRODUCT DETAILS EN: Provides dual‑band Wi‑Fi 6 for cleaner spectrum access and higher throughput in 5 GHz, while maintaining 2.4 GHz compatibility. Dual‑band Wi‑Fi 6, Bluetooth 5 LE, and IEEE 802.15.4 provide comprehensive IoT protocol coverage, with full support for Matter, HomeKit, and MQTT. Equipped with a 32‑bit RISC‑V single‑core processor running up to 240 MHz, the XIAO ESP32‑C5 integrates 384 KB on‑chip SRAM, 320 KB ROM, 8MB Flash, and 8MB PSRAM. This combination ensures smooth protocol handling, multitasking, and application scalability. Secure boot, flash encryption, and hardware cryptographic accelerators to protect firmware and data integrity. Integrated battery management supporting ultra‑low‑power operation, with deep‑sleep current as low as 15 µA. Specification Product XIAO ESP32–C5 Chipest ESP32-C5HR8 Processor High-performance 32-bit RISC-V single-core microprocessor, up to 240MHz and a low-power 32-bit RISC-V core at up to 48MHz (according to Datasheet, up to 20MHz p.69 of Technical Reference Manual v0.2) SRAM 384KB RSRAM 8MB Flash 8MB Interface 11x GPIO Pin 1x Analog Pin + 4x Analog Pad on the reverse side 1x I2C 1x UART 1x SPI 1 x JTAG (Pads on the reverse side) On Board 1x User LED (Green) 1x Charge LED (Battery Charging Indicator) 1x Reset Button 1x Boot Button 1x UFL Connector Antenna 2.4GHz FPC (2.9dBi) (same as used on XIAO ESP32-C3) Wireless Connectivity 2.4 and 5 GHz dual-band Wi-Fi 6 (802.11ax) Bluetooth® 5 (LE) Zigbee Thread (802.15.4) Power Input Type-C: 5V/DC Battery: 3.7V Deep Sleep（Typ.） (Low Power Firmware) USB Power Supply: 375 µA Battery Power (BAT): 15 µA Working Temperature 0°C ~85°C Dimensions 21 x 17.8mm Note: XIAO ESP32-C3 supports dual-band Wi-Fi with certification coverage for W52, W53, and W56. Optimized for indoor environments, with outdoor deployment available upon inquiry. Application Smart Sensor Node IoT Gateway BLE Tracker Wi-Fi Button Secure Edge Device Smart Home Automation Device Wireless Security Testing