Crux Front Rear Side Reflector Kit Overlay – Dark Smoke 20% | Visual Refinement Compatible with KIA EV6 2022, 2023, 2024, 2025, 2026 +

Crux Rear Side Reflector Tint Kit | Kia EV6 2022–Present Enhance the rear-end appearance of your 2022+ Kia EV6 with the Crux Rear Side Reflector Tint Kit. This precision-cut dry-application tint overlay pair is designed to tone down the factory rear side reflectors for a cleaner, more refined look without replacing any factory parts. Each kit includes one pair of precision-cut rear side reflector tint overlays, one for the driver side and one for the passenger side. FILM DISPLAYED: Dark Smoke 20% Why It Matters The factory rear side reflectors on the Kia EV6 can stand out against the rest of the rear-end styling. This tint overlay pair helps reduce that bright reflector appearance and creates a smoother, more intentional look. Tones down the factory rear side reflectors Creates a cleaner rear-end appearance Adds a subtle blackout-inspired look Enhances factory styling without permanent modification Premium Automotive Tint Films All Crux tint overlays are produced using high-quality automotive-grade films designed for exterior durability, clean appearance, and proper installation. FEATURING: Precision die cut for proper fitment Dry application for easier installation Removable with no permanent modification Pressure-sensitive adhesive for proper adhesion Automotive-grade tint and wrap films only Dry Application – 15 Minute Install This kit is designed for dry application and can be installed in approximately 15 minutes. No slip solution, spray bottle, or wet install mess is required. A heat gun or hair dryer and squeegee are recommended to help tuck the film cleanly around the edges and set the overlays into place. Dry application – no slip solution required Estimated install time approximately 15 minutes Heat source recommended for edge tucking Squeegee or application card recommended Designed for DIY installation at home DIY-Friendly Installation This installation can be completed at home with basic wrap tools and light heat. RECOMMENDED TOOLS: Squeegee or application card Heat gun or hair dryer Clean microfiber towel Surface cleaner, isopropyl alcohol recommended Clean the surface thoroughly before installation for best results. Light heat helps the film conform around edges and contours while improving adhesion and overall finish. Fitment Kia EV6 2022, 2023, 2024, 2025, 2026 Compatible with all trims. This kit is designed specifically for the Kia EV6 rear side reflector design. It is not intended for other Kia models or vehicles with a different rear reflector layout. What’s Included Two rear side reflector tint overlays Driver side overlay Passenger side overlay Important Notes This product is a vinyl tint overlay applied directly over the existing factory rear side reflectors. It is not a replacement reflector, light, housing, lens, or plastic trim component. Due to reflector contours, installation technique, and selected film finish, slight variation in final appearance may occur. Check all local and state laws before ordering and installing vehicle lighting modifications. Due to variations in lighting and screen settings, color appearance may vary slightly from images. 2022+ Kia EV6 Rear Side Reflector Tint Upgrade This Kia EV6 rear side reflector tint kit is designed for 2022+ models, offering a simple way to refine the factory rear-end appearance without permanent modification. Whether you’re building a subtle daily driver or adding stronger contrast to a blackout-inspired setup, this dry-application tint overlay pair gives the EV6 a cleaner, more finished rear-end look. Complete Your Kia EV6 Build Looking to take your EV6 further? Pair this upgrade with other visual refinement products and vehicle-specific upgrades: Shop all Kia EV6 vinyl overlays Browse all Kia EV6 products View the full Kia EV6 upgrade guide FAQ: Do I need to order two? No, this product is sold in a set for both sides of the vehicle. One for the driver’s side and one for the passenger’s side. How long before I can wash my car? You can wash your vehicle directly after applying. No wait time is required. We highly recommend hand washing vs. automatic car washes. Automatic car washes use harsher chemicals that can reduce the longevity of the product. How warm does it have to be to install? We recommend an outside temperature of at least 60 degrees Fahrenheit for easy installation. How long will this last? Multiple factors can affect the life of vinyl outdoors. You can expect 4-5 years life expectancy, but they are rated to last up to 10 years. Factors that affect longevity include temperature changes, air quality, frequent car washes, and the conditions in which the vehicle is parked (inside/outside). SHIPPING: Most items are shipped with in 1 – 2 business days VIA USPS First class mail with a tracking number. For International orders delivery times will range from 5 business days to 15 business days depending on location. Items ship USPS First Class International mail with a tracking number. INSTALLATION: FOR WET AND DRY PREP: Clean the surfaces around the application area with car soap, then dry the area. Wipe down the application area with rubbing alcohol and a microfiber towel. Allow rubbing alcohol to dry. Start the product application after these steps are complete. FOR WET AND DRY APPLICATION: Installation should be done in temperatures of at least 60 degrees Fahrenheit. You will need to apply using a heat gun on a low setting for any curved portion of the light. FOR NON-AIR RELEASE: Fill a spray bottle with water and one drop of dish soap. Spray down the light and back of the film (adhesive side). Align the film onto the light. Spray down the top of the film. Using one of our installation squeegees, squeegee the water out from the film. Allow dry times of two days before using any power washer on the vehicle. FOR AIR RELEASE FILM: Align and apply dry. Using a squeegee or your fingertips, work the film downwards pushing the air out from behind the film. Once applied, use a heat gun to apply heat on a low setting and press down the film again. This helps the film set. If you missed any areas, you would see air bubbles. To remove bubbles, let the film cool to room temperature and work the bubbles out of the film. QUESTIONS: Have a question about this or any of our other items? Send us an email on our contact page! We look forward to getting your questions answered within 24-48 hours. *Check all local laws before purchasing*