GN200G DIY Connector 5V RS232 NMEA0183 GPS GLONASS GALILEO receiver , 9600 baud rate,module with antenna TOPGNSS

TOPGNSS GN200G Using high-quality shielded cable design, support for DIY connector. Applicable to marine navigation, 5V, GNSS GPS BDS GLONASS GALILEO receiver ANTENNA , RS232, RS-232 GPS receiver, mushroom box, 9600 baud rate, antenna module integrated design. Default GPS mode Built-in Flash, can support change baud rate, NMEA data protocol Default output: GPS + GLONASS, baud rate 9600, update rate 1Hz, cable length: 3m by default (customizable from 5m to 15m). Operating voltage: 3.6V–5V. waterproof rating: IP67. Connector: DIY 4-pin Red wire: VCC 5V, Black wire: GND, Green wire: TX (output), White wire: RX (input) Features： Parameter Specification Electrical Characteristics Chipset M8030-KT Receiving Format GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS Frequency GPS L1，GLONASS L1，BeiDou B1，SBAS L1，Galileo E1 Channels 72 Searching Channel Sensitivity Tracking -167dBm Reacquisition -160dBm Cold start -148dBm Hot start -156dBm Accuracy Position Horizontal 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky) Velocity 0.1m/sec 95% (SA off) Timing 1us synchronized to GPS time Acquisition Time Cold Start 26s Warm start 25s Hot start 1s Data and Update Rate Support Rate Default 9600bps,4800bps to 921600bps, Data Level RS232 level Data Protocol NMEA-0183 or UBX, Default NMEA-0183 Single GNSS 1Hz-18Hz Concurrent GNSS 1Hz-10Hz,Default 1Hz Operational Limits Altitude 50,000m Max Velocity 515m/s Max Acceleration Less than 4g Power consumption VCC DC Voltage 5V, Current Capture 70mA/24V Mechanical Specifications Dimension ΦO=96mm*124mm Weight 100g Connector DIY 4PIN Red wire: VCC 5V, Black wire: GND, Green wire: TX (output), White wire: RX (input) Cable Length 3.0m Environment Operating temp -40 °C ~ +85°C Storage Temp -40°C ~ +105°C If you have special needs, please contact us!