60 in. W × 32 in. D × 4 in. H Single Threshold Acrylic Shower Base – Center, Left or Right Drain

60 x 32-Inch Alcove Shower Fit: Designed for standard 60 x 32 in. shower layouts, with a 4-inch overall height. The single-threshold design provides a defined entry for a three-wall shower enclosure. Three Drain Location Options: Choose a center drain, left drain, or right drain to suit your bathroom plumbing layout. Review the corresponding dimension drawing before selecting your configuration. High-Gloss White Acrylic: The smooth, bright finish complements a wide range of bathroom tiles, wall finishes, and modern shower door styles. Slip-Resistant Textured Surface: The patterned shower floor is designed to provide added traction during everyday use while maintaining a clean, understated appearance. Fiberglass-Reinforced Construction: Reinforced acrylic construction, a thicker reinforced rim, and multiple PVC support rings on the underside help provide a stable and durable shower foundation. Integrated Three-Sided Tile Flanges: Built-in flanges along three sides are designed for three-wall alcove installation. When properly integrated with the surrounding wall waterproofing system, they help support effective moisture management. Single 90 mm Threshold: The front threshold measures 3-9/16 in. (90 mm) wide. Check the compatibility of your shower door's bottom rail before purchasing. Standard Drain Compatibility: The drain opening is designed for a standard 2-inch compression drain. The drain assembly is not included. Technical Specifications: Overall Dimensions 60 in. W × 32 in. D × 4 in. H (1524 × 813 × 102 mm) Product Type Single-threshold acrylic shower base Installation Type Three-wall alcove installation Material Acrylic with fiberglass reinforcement Color and Finish White, high gloss Shower Floor Surface Slip-resistant textured surface Drain Location Options Center, left, or right Threshold Width 3-9/16 inches (90 mm) Tile Flange Depth 3/8 inch (10 mm) Integrated Tile Flanges Three sides Drain Opening Diameter 3-3/8 inches (85 mm) Drain Strainer Diameter 4-9/16 inches (116 mm) Drain Compatibility Standard 2-inch compression drain; verify compatibility with the selected drain fitting Underside Support Reinforced rim and multiple PVC support rings Drain Assembly Not included Drain Location Options: Center Drain: The drain is positioned at the center of the 60 x 32 in. shower base. Left Drain: The drain is positioned approximately 8 inches from the corresponding end, as shown in the left-drain dimension drawing. Right Drain: The drain is positioned approximately 8 inches from the corresponding end, as shown in the right-drain dimension drawing. All three configurations share the same overall base dimensions. Always confirm drain orientation and rough-in measurements against the dimension drawing for your selected variant before ordering. Installation Notes: Measure the shower alcove and verify the plumbing rough-in location before purchasing. Confirm that the 60 x 32 in. base fits the intended installation space. Choose the correct drain configuration before installation. Confirm the drain opening and fitting compatibility with your plumbing system. Install the shower base before tiling the surrounding walls so the integrated tile flanges can be incorporated into the wall assembly. The tile flanges are 3/8 inch (10 mm) deep. The installation diagram specifies a recess in the three-wall opening to accommodate the flanges. Confirm the required framing preparation with your installer before cutting. Integrate the flanges with the appropriate wall waterproofing system and follow the manufacturer's installation instructions and applicable local building codes. Install the base on a level, adequately supported substrate according to the installation instructions. Ensure the shower door's bottom rail is wider than the 3-9/16-inch (90 mm) threshold, as specified in the product diagram. Verify shower door compatibility before installation. Professional installation is recommended to help ensure proper fit, drainage, support, and waterproofing. Care & Maintenance: Clean the acrylic surface with a soft cloth or sponge and mild soap and water. Use a non-abrasive cleaner suitable for acrylic surfaces to remove everyday dirt and soap residue. Avoid abrasive pads, scouring powders, sharp tools, and harsh chemical cleaners that may scratch or dull the finish. Rinse away cleaning products after use and wipe the surface dry to help maintain its appearance. Periodically inspect the drain connection, surrounding sealant, and visible installation joints for signs of wear or leakage. Downloads: Installation Manual