Sokkia SR-S2 Slam LiDAR Scanner

The Sokkia SR-S2 Handheld SLAM LiDAR 3D Laser Scanner is a professional portable reality capture solution designed for land surveyors, construction professionals, civil engineers, utility contractors, and mapping specialists who need to capture accurate 3D site data quickly and efficiently. Combining SLAM LiDAR technology, visual positioning, integrated RTK GNSS, and panoramic imaging, the Sokkia SR-S2 allows crews to walk through jobsites, structures, trenches, stockpile areas, and indoor environments while collecting detailed 3D point clouds. Unlike traditional stationary laser scanning workflows that require repeated instrument setups, the SR-S2 supports mobile scanning with minimal setup. The scanner captures up to 200,000 points per second with a maximum detection range of 70 meters (230 feet) on highly reflective surfaces. Its LiDAR system provides 360-degree horizontal coverage, while dual 12 MP panoramic cameras support colorized 3D point clouds for more informative site documentation. With specified absolute accuracy better than 3 cm and relative accuracy better than 2 cm under applicable measurement conditions, the SR-S2 is well suited for construction progress monitoring, stockpile volume measurements, trench documentation, underground utility mapping, building interiors, and general 3D reality capture. The integrated 1,408-channel GNSS positioning system supports RTK-based scanning workflows, helping connect captured data to survey coordinates where correction services and suitable satellite reception are available. For indoor and GNSS-challenged environments, SLAM-based mapping provides an alternative positioning workflow. Field crews can use Sokkia MAGNET Flow for scanning and real-time point cloud visualization, followed by MAGNET Bridge for processing and preparing deliverables. The workflow supports colorized LAS point clouds and panoramic JPG images, helping teams move from data collection to measurements, documentation, and project reporting. Weighing approximately 2.87 lbs (1.3 kg) with the base, battery, and RTK module, the Sokkia SR-S2 offers a compact solution for one-person 3D scanning. Its rechargeable battery provides approximately 2 hours of operation per battery, while the integrated 512 GB SSD provides onboard storage for field scanning projects. Key Features & Benefits Portable SLAM LiDAR Scanner: Capture detailed 3D environments while walking through the project area. 200,000 Points Per Second: High-speed LiDAR data collection for efficient site documentation. Up to 70 m Detection Range: Supports scanning across construction sites, industrial facilities, and outdoor environments. 360° Horizontal LiDAR Coverage: Capture surrounding site geometry during mobile scanning. Dual 12 MP Panoramic Cameras: Produce colorized point clouds and visual project documentation. Integrated RTK GNSS: Supports georeferenced scanning workflows with a 1,408-channel GNSS engine. Multi-Sensor SLAM Technology: Supports mapping in indoor areas and locations with limited GNSS reception. High-Accuracy Reality Capture: Specified absolute accuracy better than 3 cm and relative accuracy better than 2 cm under applicable conditions. Real-Time Point Cloud Preview: Review scanning coverage in the field using MAGNET Flow. MAGNET Bridge Processing: Process scan data and prepare professional 3D deliverables. Lightweight Design: Approximately 1.3 kg with base, battery, and RTK module. IP64 Protection: Designed for professional field environments. 512 GB SSD: Onboard storage for scanning projects. From construction as-built documentation and earthwork volume calculations to indoor mapping and utility infrastructure capture, the Sokkia SR-S2 helps surveying and construction teams collect detailed spatial information with fewer stationary setups. Looking for professional surveying and 3D reality capture equipment? Browse our selection of 3D laser scanners, GNSS GPS systems, total stations, data collectors, and construction layout equipment.