Flojet BW5003-000A Single-Inlet Bottled Water Pump System – 230–240V UK Plug

Flojet BW5003-000A Bottled Water Pump System is designed to deliver potable water from a standard commercial bottle to compatible coffee and tea machines, refrigerator water or ice dispensers, beverage equipment and portable sinks. The compact single-inlet system uses automatic demand operation and is supplied with a UK mains plug for compatible 230–240V installations. Key features Automatic demand operation: The pump stops when the bottle is empty and restarts after the water supply is restored. Single-inlet configuration: A suction wand draws from one compatible bottled-water container. Dry-run capable: Flojet diaphragm-pump design helps protect the system during brief no-water conditions. Compact and quiet: Noise-absorbing rubber mounts support discreet installation in cabinets and service areas. Installation-friendly: Snap-in ports, an illuminated power switch and the supplied discharge tube simplify setup and servicing. Built-in protection: Includes internal bypass and thermal-overload protection. Technical specifications Brand: Flojet Manufacturer: Xylem Model: BW5003-000A Configuration: Single inlet Mains input: 100–240V AC, 50/60Hz Supplied mains connection: UK cord and plug Pump-side voltage: 12V DC through the supplied transformer Maximum current: 1.2A Open flow: Up to 1.0 GPM / 3.78 L/min under manufacturer test conditions Maximum pressure: 40 PSI / 2.8 bar Self-priming: Up to 2.7m dry prime Fluid temperature range: 4–60°C Approximate module dimensions: 19.4 × 13.0 × 7.5cm Shipping weight: Approximately 2.1kg Ingress rating: IPX4 Package contents Main pump module with illuminated on/off switch Suction wand and hose assembly 6.1m discharge tube Outlet fitting kit Wall power transformer with UK cord and plug Installation and operating instructions Compatibility and safety Use only with potable water and compatible appliances. Confirm the receiving appliance’s pressure, tubing size, connection requirements and electrical supply before installation. Install indoors in accordance with the manufacturer’s instructions, use only the supplied transformer, and do not operate continuously for more than 20 minutes. Disconnect power and relieve water pressure before cleaning or service; drain the system before storage or exposure to freezing temperatures.