Neotech DG-201 24K Gold-Plated OFC Copper RCA Connectors – Set of 4

Neotech DG-201 24K Gold-Plated OFC Copper RCA Connectors – Set of 4 Designed for substantial high-end interconnect cables. The Neotech DG-201 combines a gold-plated OFC copper centre signal pin, PTFE dielectric and an unusually generous 10.5mm cable capacity, making it particularly well suited to larger Neotech UP-OCC and OFC analogue interconnect cables. ✔ OFC copper centre signal pin with Cryo Treatment ✔ 24K gold-plated contacts ✔ Low-permittivity PTFE dielectric insulation ✔ Accepts large cables up to Ø10.5mm ✔ CNC-machined construction ✔ Secure screw cable clamping ✔ Ideal for premium OFC and UP-OCC interconnects ✔ Supplied as a set of 4 RCA connectors ✔ Genuine Neotech product from the official Australian importer & distributor The Neotech DG-201 is a premium male RCA connector specifically designed to accommodate the larger cable diameters found in serious audiophile interconnects. With an internal cable capacity of up to Ø10.5mm, it provides considerably more room than many conventional RCA plugs and is an excellent match for substantial shielded and multi-conductor analogue cables. At the heart of the DG-201 is an OFC copper centre signal pin, providing a highly conductive path for the audio signal. The contacts are finished with 24K gold plating for excellent resistance to oxidation and corrosion, while a precision PTFE dielectric electrically isolates the centre conductor from the outer contact. The result is a well-engineered RCA termination ideally suited to high-quality OFC, high-purity copper, Litz and UP-OCC copper interconnect cables, particularly where both conductor quality and sufficient cable entry diameter are important. OFC Copper Signal Pin The centre pin of an RCA connector carries the primary audio signal, making its material particularly important. Rather than relying on a conventional brass centre pin, Neotech uses OFC copper for the DG-201's central signal contact. Copper provides substantially higher electrical conductivity than brass, making the DG-201 particularly appropriate for premium copper interconnects where maintaining good material continuity throughout the signal path is desirable. This makes the connector a natural partner for Neotech's own high-purity OFC and UP-OCC analogue cables as well as other premium copper interconnect designs. 24K Gold-Plated Contacts The contact surfaces are finished with 24K gold plating, providing excellent resistance to oxidation and corrosion while maintaining a dependable electrical interface between the interconnect and your audio equipment. The combination of an OFC copper centre signal pin and protective gold-plated contact surface gives the DG-201 a strong foundation for high-quality analogue signal transmission. PTFE Dielectric Insulation Connector performance is determined by more than just the conductive material. The dielectric surrounding and separating the signal contacts also becomes part of the electrical environment of the connection. Neotech therefore uses PTFE insulation within the DG-201. PTFE offers excellent electrical insulation together with low dielectric permittivity, making it widely used in premium analogue cable and connector construction. This complements the high-quality copper signal contact and helps keep the connector construction appropriate for low-level analogue audio applications. Designed for Large-Diameter Interconnect Cables One of the standout advantages of the DG-201 is its generous Ø10.5mm maximum cable capacity. Many premium analogue cables use substantial insulation, shielding and multi-conductor constructions that simply will not fit inside smaller RCA connectors. The DG-201 provides the internal space required for these larger cable designs while maintaining a finished outside diameter of approximately 15mm. It is particularly well suited to cables such as the Neotech NEI-3004G, Neotech NEI-3001G and Neotech NEMOI-1220, as well as other premium analogue interconnect cables up to 10.5mm in diameter. Precision Construction The DG-201 features CNC-machined construction with a robust external body designed to provide both mechanical protection and secure cable retention. A cable clamping screw helps secure the completed interconnect within the connector body, reducing mechanical stress on the internal termination and helping produce a neat, professional finished cable. At approximately 60mm long and 15mm in outside diameter, the DG-201 remains relatively compact considering its ability to accommodate cables up to 10.5mm Technical Specifications Model Neotech DG-201 Connector Type Male RCA Centre Signal Pin OFC Copper Outer Contact / Body Brass Contact Plating 24K Gold Dielectric PTFE Maximum Cable Diameter Ø10.5mm Construction CNC Machined Cable Retention Clamping Screw Overall Diameter 15mm Total Length 60mm Quantity Set of 4 Why Buy Neotech From Audiophile Shop Australia? Audiophile Shop Australia is the official Australian importer and distributor for Neotech, supplying genuine Neotech cables, connectors and accessories with local Australian stock and support. We also use Neotech cable and connectors extensively through our A.L.A Audio custom cable workshop. We can assist with cable and connector matching or professionally assemble custom analogue interconnects using Neotech components.