AquaMaster Controller C800 Pro Inline pH, EC, PPM, TDS & temp - WiFi

AquaMaster Controller C800 Pro Inline pH, EC, PPM, TDS & Temp - WiFi The AquaMaster Controller C800 Pro Inline is a professional WiFi pH and EC dosing controller designed for pressurised irrigation and hydroponic circulation systems. Instead of using standard tank-mounted probes, the Inline version uses threaded inline electrodes installed directly into a circulation loop, allowing continuous monitoring of pH, EC, PPM, TDS and water temperature as solution moves through the pipework. It can be used as a standalone monitor or paired with C10, C20 or C30 peristaltic pumps for automatic pH and nutrient dosing. Key Features Continuously measures pH, EC, PPM, TDS and temperature Designed specifically for inline installation in pressurised irrigation and hydroponic systems Uses threaded 3/4" inline electrodes Inline electrodes are rated for operating pressures up to 2 bar Full-colour touchscreen displays live readings, alarms and historical data 2.4GHz WiFi connectivity with the Aqua Master Tools mobile app Stores up to 12 months of historical measurement data Remote adjustment of set points, dosing parameters and alarm settings Can automatically stop dosing when an alarm condition is detected Can operate as a combined pH and EC controller, pH-only controller or EC-only controller Separate UTP outputs for pH dosing and nutrient dosing C10 pump provides one dosing channel for pH adjustment or a single nutrient C20 pump provides two independent nutrient dosing channels C30 pump provides three independent nutrient dosing channels Supports up to five nutrient pumps plus one pH pump C30 can be expanded with a C10 or C20 to provide four or five nutrient dosing channels Automatic temperature compensation helps maintain consistent readings Configurable high and low alarms for pH, EC and temperature Specifications Product Name AquaMaster Controller C800 Pro Inline pH, EC, PPM, TDS & Temp - WiFi Brand Aqua Master Tools Model C800 Pro Inline Product Type Inline WiFi pH, EC and nutrient dosing controller pH Measurement Range 0.00-14.00 pH EC Measurement Range 0.00-20.00mS/cm TDS Measurement Range 0.00-14.00PPT PPM Measurement Range 0-14,000 PPM Temperature Range 0-50°C / 32-122°F pH Resolution 0.01 or 0.1 pH EC Resolution 0.01 or 0.1mS/cm TDS Resolution 0.01 or 0.1PPT PPM Resolution 7 PPM Temperature Resolution 0.1°C / 0.2°F pH Accuracy ±0.1 pH EC Accuracy ±2% full scale TDS Accuracy ±2% full scale PPM Accuracy ±2% full scale Temperature Accuracy ±0.5°C PPM Scale 700 PPM Temperature Compensation Automatic, 0-50°C pH Calibration 1, 2 or 3 point calibration at pH 4.0, 7.0 and 10.0 EC Calibration 1 point automatic calibration at EC 1.4, 3.0 or 12.88 Inline Electrode Thread 3/4" Maximum Inline Electrode Pressure 2 bar Dosing On-Time Adjustable from 1-900 seconds Dosing Off-Time Adjustable from 0-60 minutes Maximum Nutrient Dosing Channels 5 Maximum pH Dosing Channels 1 C10 Pump Configuration 1 peristaltic pump for pH or nutrient dosing C20 Pump Configuration 2 peristaltic pumps for nutrient dosing C30 Pump Configuration 3 peristaltic pumps for nutrient dosing WiFi 2.4GHz App Compatibility Android 8.0 or later and iOS 12 or later Historical Data Up to 12 months Controller Protection Rating IP63 Electrode Protection Rating IP67 Power Supply AC 85-260V, 50-60Hz Controller Dimensions 194 x 210 x 55mm Controller Weight 656g Who It’s For The AquaMaster C800 Pro Inline is designed for growers and irrigation operators who want automatic nutrient and pH control directly within a pressurised circulation loop rather than measuring from loose probes in a reservoir. It is particularly suited to larger hydroponic systems, fertigation tanks and professional irrigation installations where continuous inline measurement is preferred. Pairing the controller with C10, C20 or C30 dosing pumps allows the system to scale from simple pH correction or single-part nutrient dosing through to multi-part automated nutrient management.