xTool SafetyPro IF2 2.0 Inline Duct Fan

The xTool SafetyPro IF2 2.0 is a compact inline duct fan that pulls laser smoke out of the machine and vents it outdoors. Two fans spinning at 14,000 RPM, driven by a 55 W brushless motor, deliver 1300 Pa of suction in a housing of just 182 x 125 x 129 mm – around 5.5 times smaller than a traditional inline fan – and it switches on and off with your xTool laser.Key Specifications Airflow 140 CFM Suction power 1300 Pa Motor 55 W brushless, dual fans at 14,000 RPM each Fan speed settings 4 speeds Intelligent control Yes – auto start/stop with supported xTool lasers Duct diameter 3 inch (76 mm) Product size 182 x 125 x 129 mm Product weight 1.15 kg How It WorksFit the IF2 2.0 between the laser’s 3-inch exhaust port and a duct leading outside. On supported machines it starts and stops automatically with the job, you can set a delay so it keeps running after the laser stops, and it selects a suitable ventilation mode from the material chosen in the software. Four manual speed settings are available on every machine. Noise-reducing cotton inside the housing keeps operation quieter, and the fan detaches easily and can be rinsed with water for cleaning. The 2.3 m PP duct folds freely, so the laser does not have to sit next to a window.Duct Fan or Air Purifier?The IF2 2.0 is the right choice when you can vent outdoors: it removes smoke rather than filtering it, with no filters to replace. If you cannot vent outside, choose a filtering unit such as the xTool SafetyPro AP2 instead.CompatibilityManual and automatic modes: xTool P3 xTool P2S xTool F2 xTool F1 Ultra xTool F2 Ultra (both versions) xTool F2 Ultra UV xTool S1 xTool M1 Ultra xTool OS1 Automatic Shaker Oven Manual mode only: xTool F1, F1 Lite xTool M1 xTool P2 xTool D Series Who It’s For CO2 and diode laser users with a window or wall vent Workshops and classrooms short on floor space Available from Eolas PrintsEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. It is an efficient extraction upgrade for the xTool P3 80W CO2 laser cutter.