VSPEAK Air-fill "PRO" (onboard compressor)

VSPEAK Air-fill "PRO" (onboard compressor) For the same weight, the Air-fill "PRO" offers approximately 30% greater air output, more robust compressor mechanics, and a more powerful motor. Furthermore, the Air-fill "PRO" features temperature monitoring; an LED indicates when the temperature exceeds 60°C. For Jeti and PowerBox systems, the current temperature is provided as a telemetry value. In all other respects, the Air-fill "PRO" operates in the same manner as described above under "Auto-Air-fill." VSpeak Auto-Air-fill is an only ~220 g aprox. light onboard compressor for pneumatic chassis mechanics, brakes, etc. The pressure range can be adjusted, as well as some other parameters. Once set, the desired pressure range is regulated fully automatically. A previously required pressure reservoir can be significantly reduced - or it can be dispensed with entirely. IMPORTANT: When air is compressed, heat is generated; with high pressures and long-running times of the onboard compressor, correspondingly, a lot of heat. We, therefore, recommend using a Teflon hose (outer diameter 4mm) as the direct compressed air connection. We highly recommend using a good quality Teflon tubing 4mm OD. You can get it HERE There are several operating modes for Auto-Air-fill: Autonomous Automatic mode (remote control independent) Automatic mode Servoport (requires a servo output to which a 3-position switch has been programmed) Automatic mode Telemetry port (only with Jeti and PowerBox: Telemetry data are transferred) The compressor can be powered with a 3S LiPo with 1000mAh. In order to save weight, the compressor can also be supplied with power from the "larger" turbine battery in turbine models. If there is any potential isolation between the receiver circuit and the turbine (e.g., JetCat, HORNET, etc.) is provided by the potential isolation between the control section and the load circuit, which is also realized on the onboard compressor. The voltage of the battery can be monitored via the ECU telemetry. The VSpeak ECU converters for the turbines mentioned are also galvanically isolated, so that potential isolation is guaranteed throughout to exclude interference from the turbine on the receiver circuit. Detailed information about the Air-fill "PRO" can be found in the detailed manual.