OutBack Power FLEXmax 80A MPPT Solar Charge Controller 150VDC - FM80-150VDC

80A MPPT solar charge controller for 12V to 60V battery banks The OutBack FLEXmax 80 turns more of your solar array into battery charge, up to 30% more than a non-MPPT controller. Its fan cooling holds the full 80A output in ambient temperatures up to 40°C, and one model suits 12, 24, 36, 48 or 60V battery banks. Full power in the heat Active cooling and thermal management keep the full 80A available up to 40°C ambient. Above that, output is reduced automatically to protect the unit Note: for indoor installation or inside a weatherproof enclosure. It must not be exposed to rain or direct sunlight. See what your array is doing The built-in backlit screen shows live status and the last 128 days of performance, with no extra display needed. FLEXmax 80 Main Features: Up to 30% more from your array: a continuous, active maximum power point tracking (MPPT) algorithm keeps the array at its best operating point as conditions change. One model for every battery voltage: the battery voltage is selected in the field at start-up. Password protected settings: charge set points can be adjusted to suit your battery, then locked. Automatic temperature compensation: charging adjusts to battery temperature when the optional remote temperature sensor (RTS) is fitted. Programmable auxiliary output: can be set up for different control applications. Works with OutBack system displays: program and monitor it remotely from a MATE3s, MATE3 or MATE2. Quick Specs: Part number: FM80-150VDC Maximum output current: 80A at 40°C, adjustable current limit Nominal battery voltage: 12, 24, 36, 48 or 60VDC (field selectable) Maximum PV open circuit voltage: 150VDC absolute maximum (coldest conditions), 145VDC start-up and operating Recommended maximum array (STC): 1000W at 12V, 2000W at 24V, 4000W at 48V, 5000W at 60V Typical efficiency: 97.5% at 80A in a 48V system Peak efficiency: 98.44% (60VDC input, 48V battery at 53.1VDC) CEC weighted efficiency: 97.3% (at 48VDC) Standby power consumption: less than 1W typical Charge stages: bulk, absorption, float, silent, equalisation Voltage set points: 13 to 80VDC, user adjustable Temperature compensation: 5.0mV per °C per 2V cell, with optional RTS Auxiliary output: 12VDC, 0.2A maximum, programmable Display: 3.1in backlit LCD, 4 lines, 80 characters Data logging: last 128 days Network connection: RJ-45 with CAT5 cable Operating temperature: -40°C to 60°C (power derated above 40°C) Environmental rating: Indoor Type 1 Conduit knockouts: one 1in on the back, one 1in on the left side, two 1in on the bottom Dimensions (h x w x d): 413 x 146 x 114 mm Weight: 5.53kg Certifications: ETL listed to UL1741, CSA C22.2 No. 107.1 What's Included: 1x OutBack FLEXmax 80 MPPT solar charge controller (FM80-150VDC) Specifications Click Here To View OutBack FLEXmax 80 DATASHEET Manual Click Here To View OutBack FLEXmax 60 and 80 Owner's MANUAL