Gareth Ashton RAS12-316 316 Marine Grade Round Shower Head 250mm

Product Overview: The Gareth Ashton RAS12-316 Round Shower Head is a 250mm horizontal shower head in marine grade 316 stainless steel, made for outdoor showers, pool areas and coastal bathrooms. The round head delivers a broad, gentle spray, and the stainless steel is chosen to stand up to salt air, sun and humidity. It has a 3 star WELS rating at 8.5L/min and works with a mains pressure range of 150 to 750kPa. A flow controller is fitted inside the head, and the swivel connection lets the head be angled after it is fitted. Product Features: Marine grade 316 stainless steel: built for outdoor and coastal conditions. 250mm round head: a wide, even spray pattern. Horizontal arm style: a clean line from the wall. Swivel adjustment: angle the head after fitting. 3 star WELS rating: 8.5L/min flow rate, registration number S18761. Flow controller fitted: keeps flow consistent across the pressure range. Colour / Finishes: Stainless Steel - RAS12-316 Programmes / Functions: Single spray pattern: a broad, rain style spray from the 250mm head. Adjustable angle: swivel the head up or down to suit the user. Cleaning & Maintenance: Everyday cleaning: wipe with warm water, mild detergent and a soft cloth, then rinse and dry. Avoid harsh products: do not use abrasive pads, steel wool or harsh chemicals. Coastal care: rinse with fresh water regularly in coastal areas. Do not remove the flow controller: removing it voids the warranty. Specifications: Product type: Wall arm shower head Material: Marine grade 316 stainless steel Head diameter: 250mm Shape: Round Arm style: Horizontal Operating pressure: 150 to 750kPa Maximum pressure: 500kPa (as marked) WELS rating: 3 star, 8.5L/min WELS registration number: S18761 Certification: AS/NZS 3662, licence WM-032384 Collection: Abey 316 Alfresco Made in: Asia Installation & Requirements: Thread tape: apply thread tape to the wall spigot before fitting the arm. Filter and flow control: fit the filter, washer and flow control with the protruding side facing into the head, then tighten. Adjust: swivel the head to the required angle. Pressure: suitable for 150 to 750kPa mains supply. Not suitable for: gravity-fed, low or unequal pressure systems, instantaneous gas heaters, tempering valves or thermostatic mixing valves. Licensed plumber: installation should be by a licensed plumber. Extra Information: Outdoor showers take more punishment than bathroom showers: sun, wind-driven salt, sand and constant humidity. The RAS12-316 is machined from marine grade 316 stainless steel, which resists the pitting and tea staining that can affect lesser grades near the coast. A 250mm head is large enough to feel like a proper rain shower while keeping the flow at an efficient 8.5L/min, so it is a good partner for a pool shower, a beach house or a poolside bathroom. Included Products / Accessories: Shower head: 1 x RAS12-316 round shower head with horizontal arm. Flow control, filter and washer: supplied for fitting. Installation instructions: supplied in the box. Warranty: Gareth Ashton products are distributed in Australia by Abey Australia Pty Ltd and are backed by a 10-year warranty on tapware and a 5-year warranty on showers and bathroom accessories. All warranties are in addition to your rights under the Australian Consumer Law. Downloads / Product Files: SPECIFICATIONS SHEET (PDF) INSTALLATION INSTRUCTIONS (PDF)