DAYLIFF DSM 1.5kW 3PH SUB MOTOR

DAYLIFF DSM submersible motors are specifically designed to give exceptional reliability and efficiency in all borehole pumping applications. FEATURES & BENEFITS Features include:- 4" oil filled type motor with FDA approved colourless oil 6/8" canned type motor with resin filled stator for extended motor life Largely stainless steel AISI 304 construction with cast iron top and bottom bearings Water lubricated thrust and radial bearings Reinforced netted Nylon diaphragm for internal motor pressure compensation Thermal overload for motor protection Standard NEMA flanges for use with all types of pumps SPECIFICATIONS Protection: IP68 Insulation Class: F Voltage: 1x220V/240V,50Hz / 3x380V/415V, 50Hz OPERATING PARAMETERS Max Voltage Variation: ±10% Max Starts/Hr: 20 Max Water Temperature: 35°C Min Water Pass Flow Rate: 0.2m/sec Max Immersion Depth: 200m - 4" and 300m - 6/8" Installation: Vertical/Horizontal with a tilt angle >5° MOTOR DATA SINGLE PHASE Power In (A) Istart (A) Efficiency (%) PF Cos Ø RPM Capacitor (µF) Tail Cable H (mm) Weight (kg) kW HP mm2 m 0.37 0.5 3.7 12 53 0.9 2840 16 1.5 1.7 346 7 0.55 0.75 5 15 62 20 365 8 0.75 1 6.2 20 64 25 380 9 1.1 1.5 8.1 32 68 35 405 10 1.5 2 10.4 38 73 40 440 12 2.2 3 15.0 46 72 55 2.5 495 14 THREE PHASE Power In (A) Istart (A) Efficiency (%) PF CosØ RPM Thrust Load (N) Trail Cable H (mm) Dia (mm) Weight (Kg) kW HP mm² m 0.37 0.5 1.6 4.5 60 0.8 2820 2000 1.5 1.7 330 94 7 0.55 0.75 1.9 6.7 64 2840 346 7 1.1 1 2.3 8.9 66 365 8 0.75 1.5 3.1 12 70 2850 380 9 1.5 2 4 14 72 405 10 2.2 3 5.6 22 71 0.85 3000 440 12 3 4 7.4 43 73 2840 5000 2 2.5 516 15 4 5.5 9.8 49 75 2850 607 20 5.5 7.5 13.7 71 76 683 23 7.5 10 18.9 96 76 783 28 5.5 7.5 12.7 59.5 79 2837 4 4 627 140 51 7.5 10 16.5 67.5 79 0.86 2826 662 55 11 15 24.2 60.7 77 2802 15500 4.0 727 61 15 20 32 142.3 80 2837 15500 4.0 4.0 787 67 18.5 25 40 101.2 81 2814 857 75 22 30 47 139.4 77 0.89 2720 6 907 80 26 36 58 301 82 0.86 2003 11000 5 1004 101 30 40 64.1 320 83 0.84 2848 27500 8.4 1047 102 37 50 72.4 275 82 0.85 2850 1417 117 45 60 96 672 87 0.84 16 1105 172 55 75 118 826 88 10*2 1205 202 MATERIAL SPECIFICATION Component Material Motor shell 304 stainless steel Sand guard NBR Cable connector 4"-EPDM, 6/8"-XLPE Upper end bracket cover 4"-304 stainless steel, 6/8"-Cast Iron Upper end bracket Zinc plated cast iron Mechanical Seal Ceramic / Carbon Shaft (0.5-10HP) 4”-304 stainless steel, 6”-AISI 420 Rotor (0.5-3HP) 4”-Aluminium Rotor (4-10HP) 4”-Copper Winding Copper Lower end bracket 4”-Aluminium, 6/8”-Cast Iron Lower end bracket cover 4”-304 stainless steel, 6/8”-Cast Iron Diaphragm NBR