Greenhouse Arch Hoop Bender | USA Made

Building your own hoop house starts with one tool: a bender that makes clean, consistent hoops every time. Our heavy-duty Hoop Bender, made in the USA by Bootstrap Farmer and fabricated in Texas, turns standard conduit or top rail into professional-grade greenhouse hoops for a fraction of the cost of prebent kits. Available in 4', 6', 10', 12', 16', and 20' hoop sizes, there’s a bender for everything from low caterpillar tunnels to full-size high tunnels. Built on 1/8" heavy-duty channel with a redesigned leverage bar and an all-weather powder coat finish, it’s built to bend as many hoops as your operation needs, season after season. Just source your conduit locally (we’ll show you exactly how much you need), and you’re ready to start bending. Need a pointed roof for better snow shedding? Check out our diy gothic bender! Features: Made in the USA 4' and 6' benders work with 3/4" or 1/2" EMT conduit 10', 12', 16', and 20' benders work with 1-3/8" top rail Heavy-duty 1/8" channel with redesigned leverage bar Powder-coated for weather protection What’s Included: Hoop bender Hardware for mounting to any solid, flat surface Extension bar for added leverage at the end of your bend (10'–20' benders only; the 4' and 6' don’t need one) PDF Instructions Conduit needed for caterpillar or high tunnel greenhouse (hoop house) 4' and 6' caterpillar tunnel - (1) 10' x 3/4" or 1/2" EMT per hoop 10' and 12' wide high tunnel hoop house - (2) 10.5' x 1⅜" top rail per hoop 16' wide high tunnel hoop house- (2.5) 10.5' x 1⅜" top rail per hoop 20' wide high tunnel hoop house - (3) 10.5' x 1⅜" top rail per hoop Greenhouse Width | Approximate Height 4' | 47" 6' | 40" 10' | 8.5' 12' | 8' 16'| 9.5' 20' | 10.75' Finished center height, measured from the ground. 10'-20' heights include the ground posts (about 2 ft above ground). 4' and 6' heights are the hoop alone, sitting on the ground (lower if you push the hoops into the soil). Install the bender 5-6 feet above the ground to provide enough working space. To keep the hoop steady, mount the bender on a flat surface that's at least 4 feet long. This will ensure the hoop bends in the desired direction without curving when upright. Video Tutorials Hoop Bender 101- Bending a 4' Hoop- Bending 16' Hoops- Bending 6-20' Hoops-