Fast Fit Rolling Bench Height Reduction Kit - 4 in Leg (6-Piece)

Fast Fit Rolling Bench Height Reduction Kit - 4 in Leg (6-Piece)Not every grow room has the ceiling height or light mounting position to work with a 27-inch bench — and adjusting your entire setup around a fixed stand height isn't always practical. The Fast Fit Rolling Bench Height Reduction Kit replaces the standard legs on the Fast Fit Tray Stand (4 8 ft #706113) with 4 in legs, dropping the overall stand height from 27.25 in down to 13.125 in. Each kit includes six legs and a screw pack with everything needed for the swap.This is a straightforward hardware solution for growers who need a lower canopy profile — whether that's to reduce the distance between bench surface and lighting, optimize vertical space in a low-ceiling environment, or accommodate a specific rack or room configuration, such as layouts utilizing a Fast Fit Continuous Bench System. No additional tools or components are required beyond what's included in the kit.Features 📉Drops Height by 14 in Reduces the Fast Fit Rolling Bench Tray Stand (#706113) from 27.25 in to 13.125 in overall height — a 14 in reduction that significantly changes bench-to-light distance and ceiling clearance dynamics. 🔩Hardware Included Each kit includes six 4 in legs and a screw pack with all the fasteners needed to complete the installation — no additional hardware purchases required. 🎯Purpose-Built Fit Engineered specifically for the Fast Fit Rolling Bench Tray Stand 4 8 ft (#706113) for a direct, properly toleranced fit without shimming or modification. 📇Same Fast Fit Build Quality Built to the same material and finish standards as the rest of the Fast Fit rolling bench system, including heavy-duty components like Fast Fit HD Caster Wheels, ensuring the reduced-height configuration maintains structural integrity under load. Specifications Specification Value Leg Height 4 in Legs per Kit 6 Compatible Stand Fast Fit Rolling Bench Tray Stand 4 8 ft (#706113) Original Stand Height 27.25 in Reduced Stand Height 13.125 in Hardware Included Screw pack Kit Weight 6.125 lb Brand Fast Fit FAQs Which Fast Fit stand is this height reduction kit compatible with? + This kit is designed specifically for the Fast Fit Tray Stand (4 8 ft, model #706113). It is not listed as compatible with other Fast Fit stand sizes or configurations — confirm your stand model before ordering. What height will my bench be after installing this kit? + Installing the 4 in leg kit reduces the overall stand height from 27.25 in to 13.125 in — a reduction of just over 14 in. Factor this into your lighting hang height and aisle clearance planning before installation. Does the kit include all the hardware needed for installation? + Yes — the kit includes six 4 in legs and a screw pack containing all the fasteners required for the installation. No separate hardware purchases are necessary to complete the leg swap. Why would I want to lower my rolling bench height? + Lowering bench height is useful in several situations: reducing the bench-to-light distance in low-ceiling rooms, optimizing vertical space in multi-tier vertical grow configurations, or accommodating specific room layouts where the standard 27.25 in height creates clearance conflicts with fixtures, ducting, or equipment. Will reducing the leg height affect the structural integrity of the stand? + The Height Reduction Kit is a manufacturer-designed accessory built to the same material standards as the Fast Fit rolling bench system. Replacing the legs with the included 4 in legs using the provided screw pack maintains the intended structural connection — this is not a field modification, but a supported configuration from Fast Fit, similar in quality to the Fast Fit Trellis Support System.