IFlight Borg 60R/60RS ECS MINI F7 FC/ Borg MINI H7 FC Flight Control for FPV Drone

Note:Pls note the flight controller Borg MINI F7 FC &Borg MINI H7 FC. Note Pls note the ECS Borg 60R&Borg 60RS ECS. If have any questions pls contact us,thanks you! Description： Borg 60R ECS Introducing the All-New Borg Series – Power Meets Precision! The new ESCs feature an integrated anti-spark filter, providing protection against voltage spikes that can damage your equipment. Designed with high polymer capacitors, this ESC eliminates the need for external capacitors in 5-inch racing models, simplifying installation and reducing weight. Experience enhanced reliability and performance with this cutting-edge technology, tailored for the demands of competitive racing. Features Support 4- 8S Battery Input for versatile power options. 8-Layer 3OZ PCB allows for continuous current handling of 60A, with a peak current of 65A. Integrated Anti-Spark Filter protects your equipment from voltage spikes. Built-in High Polymer Capacitors eliminate the need for external capacitors in racing models. FPC Ribbon Cable Connection ensures a more reliable link between the flight controller and ESC. Specifications Product Name: Borg 60RS ESC Input Voltage: 4-8S; Support LIHV battery Max. Continuous Current: 60A Max. Burst Current: 65A (10s) MCU: STM32G071N Driver: FD6288 Firmware: BL32 (32bit ESC) Target: IFLIGHT_BLITZ_G3 32.9 Current Sensor: No BEC: No Telemetry: Supported Bidirectional DSHOT: Supported Dimensions: 45*35mm±1 Mounting Holes: 20 x20 mm/Φ4mm Weight: 14.1g±1 Protocol: Supports DShot150/300/600、MultiShot、OneShot etc. Packing List 1 x Borg 60RS ESC 1 x Cables set 4 x silicon grommets Description 60RS ECS Introducing the All-New Borg Series – Power Meets Precision! The new ESCs feature an integrated anti-spark filter, providing protection against voltage spikes that can damage your equipment. Designed with high polymer capacitors, this ESC eliminates the need for external capacitors in 5-inch racing models, simplifying installation and reducing weight. Experience enhanced reliability and performance with this cutting-edge technology, tailored for the demands of competitive racing. Features Support 4- 8S Battery Input for versatile power options. 8-Layer 3OZ PCB allows for continuous current handling of 60A, with a peak current of 65A. Integrated Anti-Spark Filter protects your equipment from voltage spikes. Built-in High Polymer Capacitors eliminate the need for external capacitors in racing models. FPC Ribbon Cable Connection ensures a more reliable link between the flight controller and ESC. Specifications Product Name: Borg 60RS ESC Input Voltage: 4-8S; Support LIHV battery Max. Continuous Current: 60A Max. Burst Current: 65A (10s) MCU: STM32G071N Driver: FD6288 Firmware: BL32 (32bit ESC) Target: IFLIGHT_BLITZ_G3 32.9 Current Sensor: No BEC: No Telemetry: Supported Bidirectional DSHOT: Supported Dimensions: 45*35mm±1 Mounting Holes: 20 x20 mm/Φ4mm Weight: 14.1g±1 Protocol: Supports DShot150/300/600、MultiShot、OneShot etc. Packing List 1 x Borg 60RS ESC 1 x Cables set 4 x silicon grommets Description Borg Mini H7 Flight Stack Introducing the All-New Borg Series – Power Meets Precision! The Borg Mini H7 Flight Stack is specifically designed for racing fpv, providing unmatched performance. Elevate your racing experience with the cutting-edge technology of the Borg Series! Features Flight Controller Features Supports 4S to 8S battery inputs, offering versatility for various racing setups. Integrated 12V BEC provides stable power for your VTX system and allows remote control to switch it on and off. FPC cables ensure secure connections with ESCs enhance reliability across. Onboard ELRS 2.4G receiver with external antenna, supports switching to external receivers. Onboard 4 LED strip interfaces with short-circuit protection, so an LED short circuit will not affect flight controller operation. ESC Features Support 4- 8S Battery Input for versatile power options. 8-Layer 3OZ PCB allows for continuous current handling of 60A, with a peak current of 65A. Integrated Anti-Spark Filter protects your equipment from voltage spikes. Built-in High Polymer Capacitors eliminate the need for external capacitors in racing models. FPC Ribbon Cable Connection ensures a more reliable link between the flight controller and ESC. Specifications Flight Controller Specifications Product Name: Borg Mini H7 Flight Controller - SMD Receiver Input voltage: 4-8S; Support LIHV battery MCU: STM32H743VIH6 Gyro: ICM42688 OSD Chip: AT7456E（LGA） Flash: 32MB (Blackbox flash) UARTS: 5 Motor outputs: 4 I2C serial: Support VTX protocol: support DJI MSP/Smartaudio/IRCTramp/HDZero LED controller: Yes Beeper pad: Yes Betaflight Firmware target: IFLIGHT_BORG_Mini_H7 Mount pattern: 20*20 φ4 Dimensions: 36*27mm±1 Weight: 7.7g±1 BEC: 5V 2.5A, 12V 2A (12V with VTX switch) SMD Receiver Specifications MCU: ESP8285 RF: SX1281 Receiver Type: 2.4GHz Telemetry power: 100mW (20dBm) LNA: YES Lua Script: iFlight 2400 RX TCXO: Yes Firmware: iFlight2.4GHz_2400_RX ESC Specifications Product Name: Borg 60RS ESC Input Voltage: 4-8S; Support LIHV battery Max. Continuous Current: 60A Max. Burst Current: 65A (10s) MCU: STM32G071N Driver: FD6288 Firmware: BL32 (32bit ESC) Target: IFLIGHT_BLITZ_G3 32.9 Current Sensor: No BEC: No Telemetry: Supported Bidirectional DSHOT: Supported Dimensions: 45*35mm±1 Mounting Holes: 20 x20 mm/Φ4mm Protocol: Supports DShot150/300/600、MultiShot、OneShot etc. FC Wiring Suggestion UART 1 for VTX HD / Analog UART 2 for ESC Telemet UART 4 for On-board Receiver UART 7 for GPS or other sensors that require a serial port UART 8 for GPS or other sensors that require a serial port Packing List 1 x Borg Mini H7 Flight Controller With SMD Receiver 1 x Borg 60RS 4-in-1 ESC 1 x Cable set 5 x silicon grommets VTX_ON_OFF Mode Command resource PINIO 1 PD10 set pinio_config = 1,1,1,1 set pinio_box = 40,41,255,255 set box_user_1_name = VTX_ON_OFF aux 0 40 8 900 2100 0 0 save Note The iFlight product is for fun purposes only and does not support autonomous flight. Description Borg Mini F7 Flight controller Introducing the All-New Borg Series – Power Meets Precision! The Borg Mini F7 Flight Controller (With Receiver) is custom-built for racing FPV and delivers exceptional performance. This advanced controller comes with a built-in ELRS 2.4GHz receiver and integrated antenna. It delivers a stable signal connection and smoother flight control during use. Beyond its internal receiver, the Borg Mini F7 Flight Controller (With Receiver) also supports external receivers. This lets you tailor your device setup to fit your unique racing requirements. Upgrade your FPV racing experience with the state-of-the-art Borg Series! Features Built-in ELRS 2.4GHz Receiver, while also being compatible with external antennas for enhanced flexibility. Supports 4S to 8S battery inputs, offering versatility for various racing setups. Integrated 12V BEC provides stable power for your VTX system and allows remote control to switch it on and off. FPC cables ensure secure connections with ESCs, while SH1.0 connectors enhance reliability across all other interfaces. Specifications Flight Controller Specifications Input voltage: 4-8S; Support LIHV battery MCU: STM32F722RET6 Gyro: ICM42688 OSD Chip: AT7456E（LGA） Flash: 16MB (Blackbox flash) UARTS: 6 Motor outputs: 4 I2C serial: Support VTX protocol: support DJI MSP/Smartaudio/IRCTramp/HDZero LED controller: Yes Beeper pad: Yes Betaflight Firmware target: IFLIGHT_BLITZ_F722 Mount pattern: 20*20 φ4 Dimensions: 34*28.5mm±1 Weight: 6.8g±1 BEC: 5V 2.5A, 12V 2A (12V with VTX switch) SMD Receiver Specifications MCU: ESP8285 RF: SX1281 Receiver Type: 2.4GHz Telemetry power: 17mW (12.3dBm) LNA: No Lua Script: iFlight 2.4GHz Nano TCXO: Yes Firmware: iFlight 2.4GHz Nano RX FC Wiring Suggestion UART 1 for VTX HD / Analog UART 2 for On-board Receiver UART 3 for GPS or other sensors that require a serial port UART 4 for GPS or other sensors that require a serial port UART 5 for GPS or other sensors that require a serial port UART 6 for ESC Telemet Packing List 1 x Borg Mini F7 Flight Controller With SMD Receiver 1 x Cable set 5 x silicon grommets VTX_ON_OFF Mode Command resource PINIO 1 C0 set pinio_config = 1,1,1,1 set pinio_box = 40,41,255,255 set box_user_1_name = VTX_ON_OFF aux 0 40 8 900 2100 0 0 save Note The iFlight product is for fun purposes only and does not support autonomous flight.