CarPro IronX LimeScale (500ml)

CarPro IronX LimeScale | Automize Iron Fallout and Water Spots. One Pass. CarPro IronX LimeScale is a hybrid decontamination spray that removes embedded iron particles and dissolves hard-water mineral deposits in a single step. Two problems, two products — until now. Standard iron removers pull ferrous contamination but leave calcium and magnesium deposits sitting on the paint. IronX LimeScale is mild acid-based rather than pH-neutral, which is what lets it break down brake dust and rail fallout while simultaneously attacking the mineral spotting left behind by hard water and sprinkler overspray. You spray once, dwell once, rinse once, and the panel comes back smooth and clear — ready for compound, polish, or a coating. For a decontamination stage that usually eats an hour, that's a real saving. Two Jobs, One Step Combines iron fallout removal and mineral spot removal into a single application, cutting a stage out of your decon process. Dissolves Hard-Water Deposits Breaks down calcium and magnesium deposits left by tap water, sprinklers, and rain — the spotting that survives a normal wash. Pulls Embedded Iron Targets ferrous particles from brake dust and rail dust that sit in the clear coat and cause rust spotting over time. Correction-Ready Surface Leaves paint, glass, and wheels clean and smooth, so you go straight into polishing or protection without a second decon pass. 🛠️ How to Use 1 Prep Wash and rinse the vehicle, then remove the bulk of the standing water. Work on a cool surface out of direct sun — never on hot panels. 2 Spray & Dwell Shake well, then spray evenly across the contaminated area and allow a short dwell. Do not let the product dry on the surface. 3 Agitate & Rinse Agitate gently with a wash mitt to help lift the dissolved contamination, then rinse thoroughly with plenty of water. Reference Points Type Mild acid-based hybrid iron and mineral remover Removes Iron fallout, brake dust, rail dust, hard-water mineral spotting Surfaces Exterior paint, glass, wheels Dwell Time Roughly 30–120 seconds depending on conditions — never allow to dry Ceramic-Coated Cars More aggressive than standard IronX — see note below Next Step Compound, polish, sealant, or coating CarPro advise that IronX LimeScale is more aggressive toward ceramic coatings than standard IronX — it will not strip a coating, but repeated use can affect its hydrophobic behaviour. On a coated car, reach for standard IronX first and keep LimeScale for genuine mineral spotting. Dwell times are reference points only, not a formula: work out of direct sun, test on an inconspicuous area first, use appropriate PPE and ventilation, and follow the manufacturer's label for current guidance. The decon step that does two jobs at once. Order now for quick delivery all over Pakistan.