Chicago Pneumatic Ironman 7-270 Air Compressor (270L, 3 Phase)

The Chicago Pneumatic Ironman 7-270 is a 7.5 HP three-cylinder cast iron compressor on a 270 litre tank. At 27.2 CFM usable output it supports roughly three to four air tools running at once. 415V 3-PhaseCast iron77+ dB(A) at 1mHeavy duty PowerRequires three-phase power at 13.6 Amp. Confirm your supply capacity before ordering. WorkloadBuilt for continuous commercial operation with three to four operators using air at once. Noise77+ dB(A) at one metre. Best placed in a plant room or away from customer areas. Air qualityOil-lubricated. Fit a filter and water separator before any tool used near paint or interiors. Best suited to Ideal for Three to four bay workshops Multiple operators using air simultaneously Continuous commercial operation Larger detailing and automotive facilities Not the right choice if You do not have three-phase power You only have one or two operators, the 5-150 is more economical Noise is a constraint in your space What it can handle Application Suitability Blow gun / drying Comfortable Interior cleaning gun Comfortable Air sander or polisher Comfortable, multiple operators supported Two tools at once Comfortable Three to four tools at once Suitable, this is what it is designed for Five or more tools Not recommended, step up to the 10-270 Tool and application suitability above is general guidance based on typical air consumption, not a performance guarantee. Actual results depend on your tools, air line setup, working pressure and how continuously you run them. If you are unsure whether this compressor suits your specific setup, get in touch before ordering. Before you order: Requires three-phase power. At 250 kg this needs proper placement and likely mechanical handling on delivery. Specifications Specification Detail Motor 7.5 HP / 5.5 kW Piston displacement 36.4 CFM / 1030 L/minWhat the pump moves. Free air delivery 27.2 CFM / 770 L/minUsable output. Size your tools against this. Maximum pressure 10 bar / 145 psi Tank 270 litres Power supply 415V three phase, 13.6 AmpThree-phase supply required. Pump speed 800 RPM Noise level 77+ dB(A) at 1 metre Pump type Cast iron piston, 3 cylinder / 1 stageThree cylinders deliver more air per revolution. Weight 250 kg Dimensions (L x W x H) 1560 x 610 x 1280 mm Warranty 2 years on the pump Choosing the right option Choose this if you have three or four operators needing air simultaneously, or a multi-drop ring main in regular use. Step down if you only have one or two operators. The Ironman 5-150 is more economical for that workload. Step up if you are running five or more outlets. The Ironman 10-270 is the largest in our range. Planning a ring main? Use the Air Line Configurator to size your pipework. Common questions How many tools can it run at once?Around three to four, based on 27.2 CFM usable output against typical detailing tool draw of 5 to 7 CFM each. High-draw tools like sanders will reduce that figure.Why three cylinders instead of two?More air delivered per revolution at the same pump speed, so the compressor keeps up with multiple simultaneous draws without constantly cycling.Do I need three-phase power?Yes, and at 13.6 Amp draw. Confirm your supply has adequate capacity before ordering.How is it delivered?At 250 kg it requires mechanical handling. Get in touch to discuss delivery access for your site before ordering. Planning a full compressed air setup? Plan Your Air Line Compare All Compressors