482WHP 353TQ Bone stock K24A2 on pump E85 We developed this kit with a few things in mind. Frist we have easy packaging with a ton of clearance. The straight forward design makes for a very clean setup for anything from a show car to drift missile. Second we wanted a quick spool time with excellent power potential. We had to limit the power down low because of the stock rods in our test car. This combo has a vicarial sound with power through the whole powerband to boot. Keeping in mind that these kit will be on drift cars as well , we ran the intercooler piping so you have maximum room in the wheel well. This kit should work on other RWD applications but it was designed for the Z3 so we can not guarantee fitment in other vehicles. The downpipe will end right past the firewall, you will need to get a piece made to the exhaust of your choice. DYNO Video https://youtu.be/8y5wdBzLzac?si=Z0lRiH5ajDbrQcrm Kit includes 625inc Turbo manifold Elbow 304SS G25-660 Dual Ball bearing with internal wastegate Cast turbo manifold 3" downpipe with O2 bung turbo feed and return backdoor intercooler (bar and plate) 3" Intercooler piping BOV Couplers T bolt clamps timing chain cover turbo drain Built to Order 3 to 4 Weeks THESE ARE RACE-ONLY PRODUCTS. THEY ARE MANUFACTURED AND SOLD FOR INSTALLATION ON VEHICLES DESIGNED TO BE USED SOLELY FOR COMPETITION PURPOSES. ONCE THESE PARTS ARE INSTALLED, THE VEHICLE MAY NEVER BE USED, REGISTERED OR LICENSED FOR USE ON A PUBLIC ROAD OR HIGHWAY. IF YOU INSTALL A RACE-ONLY PART ON YOUR VEHICLE AND USE THE VEHICLE ON A PUBLIC ROAD OR HIGHWAY, YOU WILL VIOLATE THE CLEAN AIR ACT AND MAY BE SUBJECT TO PERSONAL, CIVIL OR CRIMINAL LIABILITY, INCLUDING FINES OF UP TO $5,179 PER DAY.