Daly Smart BMS 4S Lifepo4 12V 8S 24V 16S 48V 100A 150A 200A 250A 300A BMS CANBUS RS485 3.2V Li-ion 3.7V Battery Protective Board

SPECIFICATIONS Balance Function: Passive Balanced BMS Brand Name: hibms Certification: CE,FCC,RoHS Charge and Discharge Port: Common Port BMS Charging Current: 200A Communicate with the inverter: supported Function: Overcharge Protection,Over Discharge Protection,Overcurrent Protection,Short Circuit Protection Handware or Smart: SMART BMS RS485/CAN: supported Type: LIFEPO4 Battery BMS Usage Scenario: Power BMS parallel limited current: 1A passive balance: 100mA Shipping from two overseas warehouses, faster delivery! German warehouse to EU countries US warehouse to the US Model DALY SMART Balance BMS: RTK(40A-100A) RM(150A-200A) RS(250A-500A) Battery Type: Lifepo4(3.2v) /Li-ion(3.7v) Balanced method: Passive Balancing 100mA Optional strings range：4S12V 8S24V 16S48V Optional current range：100A-500A Parallel current limiting: 1A (BMS can be used in parallel directly.） Accessories: Bluetooth module Usage Scenario Used in RV energy storage,photovoltaic energy storage,home and outdoor energy storage, electric vehicles,tricycles,forklifts,tourist vehicles,golf cart etc. How to choose the right BMS Attention Illustration Mismatched BMS Consequences Lithium BMS type and lithium battery type must be in 1、BMS damaged,even bms and battery burn out battery type one-to-one correspondence（Li-ion/Lifepo4) 2、The battery cannot be fully charged and discharged Number of battery pack BMS strings and battery strings must be in BMS and battery burn out strings one-to-one correspondence Selection method load maximum power÷(string number of battery×overdischarge voltage)×coefficient in experience Depending on the battery usage scenario, the coefficient value is also different Please consult customer service for specific values Specialty Bluetooth function:Monitoring battery data in real time by connecting to the APP Superiority 1、High-quality microelectronic components：precise and fast IC.Low resistance,high withstand voltage MOSFET. 2、Through the Bluetooth APP, the battery data is constantly monitored. 3、A variety of accessories,can easily control the data and modify the parameters. 4、A variety of communication modes,data monitoring,alarm backtracking,data reading, and upgrade can be easily realized 5、Thermal silica,accelerate the heat dissipation.Ensure the smooth operation of the battery. 6、Preset interface,buckle cable,make the connection more convenient. Basic Functions Over-charging protection Over-discharging protection Over-current protection Temperature protection Disconnect protection Short Circuit Protection Balance Function Short Circuit protection recover Package Contains BMS*1pcs Sampling cable*1pcs Temperature probe(NTC)*1pcs Bluetooth module *1pcs English manual *1pcs Communication function UART/RS485/CAN Balance cable connection Preparation Find the total positive and total negative of the battery pack. Find B-/P- of BMS Insert temperature probe (NTC) into the BMS Welding Note: When soldering, the balance cable cannot be inserted into the BMS (1)Weld Sampling cables: Start from thin black wire to B- (total negative),then connect each cell's positive in order. Last red wire to B+ (total positive) *Note: Do NOT plug into BMS during welding. Insulate unused wires. (2)Check voltages: Use multimeter or wire tester to confirm each cell'svoltage is normal. Fix any miswiring or poor soldering. (3) Weld output wires: Secure B- and P- to BMS with 10N·m torque; weld B-to battery negative. *Note: Insulate P- before final connection. (4) Plug NTC and Sampling cable: Insert NTC, then plug sampling cable toauto-activate BMS. Voltage measurement measure whether the battery voltage（B+→B-)is consistent with the output voltage of the BMS(B+→P-). If the two voltage values are equal, it means that the BMS is working normally. Passive Balance Balanced Start Voltage: 3.4V Balance off voltage 3.6V Balanced Opening Voltage Difference: ≥20mV Balance Current: 100±30mV Balanced start when both of the following conditions are met: 1.The maximum voltage difference between individual cells is ≥ the equalization opening voltage difference 2.The voltage of each individual cell＞The balance turn-on voltage 3.The voltage of each individual cell＜The balance off voltage Note：When the battery is at low voltage and discharged, the maximum balance current is 0.8±0.2A How to wake up BMS If any of the following conditions are met, the system exits the sleep mode and enters the normal running mode: 1.Plug in charger/load. 2.Press the button and release the button 3.With 485, CAN communication activation. Note: After the single or overall over-discharge protection, it enters sleep mode, wakes up periodically every 4 hours, and starts charging and discharging MOS. If it can be charged, it will exit the resting state and enter normal charging APP Download Scan and download the Bluetooth APP BMS activation Method ① Press the activation button on the Bluetooth module Method ② Charge activation APP connection 1、When connecting to the APP, you need to turn on the positioning and Bluetooth of the mobile phone 2、Open the "SMARTBMS" APP, you can see the bluetooth serial number on the home page (this serial number is the same as on the bluetooth module), click and enter to view the battery data. 3、Enter the battery capacity accurately, click "Setting", enter the password 123456, refresh and the setting is successful 4、The SOC adopts the ampere-hour integration algorithm. When the battery capacity is set correctly, after a complete charging and discharging process, the SOC is automatically calibrated Warning 1、BMS is a professional accessory. Misuse will cause damage. Please operate according to the instruction manual or tutorial video. 2、BMS cannot be used in series or parallel 3、BMS does not support the use of reduced string numbers 4、BMS to work for a long time in an overloaded state is strictly forbidden 5、Lithium batteries need a dedicated lithium battery charger, other chargers cannot be mixed to avoid BMS damage and other safety hazards 6、BMS disassembled by the user，No warranty policy 7、BMS is damaged due to unauthorized modification of parameters,No warranty policy Company introduction Dongguan HEYO Electronic Technology Co,Ltd located in Dongguan City,the world factory,a high-tech company engaged in BMS research and development, production and sales. It has a high-quality technical management team. Since its establishment.The company has adhered to professional theoretical knowledge, rigorous production attitude,international standard quality policy, and the same original service intention, only to create the best battery management system. About Logistics AliExpress Standard Shipping by default If you want to receive the package faster,you can choose FedEx/DHL/UPS.