Haltech Nexus R3 Ford Barra Terminated Engine Harness BA BF FG Territory
Haltech Nexus R3 Ford Barra Terminated Engine Harness BA BF FG Territory The long-awaited Ford Barra terminated engine harness is back, now designed to suit the Haltech Nexus R3 VCU! Designed to take the hassle out of wiring a Barra conversion, this harness comes terminated and ready to go, while supporting a huge range of factory Barra functions and aftermarket accessories. One of the best features is the choice of loom breakouts to suit different coil packs and injector options. Whether you're sticking with factory Ford coils or upgrading to R35 coils and aftermarket injectors, you can configure the harness to suit your setup, giving you an almost tailor-made wiring solution straight out of the box. With support for BA, BF, FG and Territory Barra engines, along with aftermarket sensors, Haltech CAN devices and spare inputs and outputs, this harness gives you a solid foundation for anything from a straightforward Barra conversion through to a serious performance build. Available Options Coil Pack Plugs Factory Ford BA/BF coils Factory Ford FG/FGX coils Nissan R35 coils – loom only Nissan R35 coils – with coil conversion kit Injector Plugs Factory Ford Bosch EV1 USCAR GT150 EV6 Denso Sumitomo The above options are to be selected from the drop-down menus. Nexus Terminated Harness Features support OEM functionality Crank sensor Intake and Exhaust Cam sensors Intake and Exhaust VCT solenoid control BA / BF / FG electronic throttle and pedal (DBW) Dual intake runner system (aka Broadband throttle system) BA / BF / FG ignition coils (sub-harness options) BA / BF / FG TMAP sensors (4-pin) Factory AC clutch and AC pressure switch Alternator control (2-pin and 3-pin) Knock sensors Aftermarket Functionality supported: (Additional sensors/parts may be required to be purchased) EV1, EV6(USCAR), or Sumitomo (Denso) injector connectors R35 COP ignition coils (requires ignition bracket and aftermarket coil stalks) Wideband lambda sensor - Bosch LSU 4.9 Flex fuel sensor MAP sensor (ECU onboard 4 bar MAP) Oil and fuel pressure sensors (Delphi 3-pin) Thermofan control Fuel pump control Haltech boost solenoid Haltech CAN devices (eg dash, keypad, IO16) Spare IOs for additional functionality Terminated Engine Harness for Nexus R3 VCU - suits the following Ford Barra Engines: BA Series – Barra 240T (XR6 Turbo) BF Series – Barra 190 (NA Falcon and SY Territory) BF Series – Barra 245T (XR6 Turbo) FG Series – Barra 270T (XR6 Turbo) Harness includes: Main terminated harness Ford Falcon BA/BF APP adaptor harness Ford Falcon FG APP adaptor harness Ford Barra BA/BF throttle adaptor harness Ford Barra FG throttle adaptor harness Nexus 2-pin BA alternator adaptor Nexus 3-pin BF/FG alternator adaptor Cabin adaptor harness Opposing connectors and pins for boost control, TMAP, Dual intake runner solenoid, spare inputs and outputs, and transmission breakout Important Information: Ignition harness, ignition module, ignition module harness and injector harness are not included as standard and are sold separately. Factory BA/BF and FG/FGX ignition coils require an HPI6 ignition module and applicable wiring. When converting to Nissan R35 ignition coils, the HPI6 ignition module is not required. R35 coil conversion requires the applicable ignition bracket and coil stalks. For R35 coil conversions, select the HT-120205 kit from the available options. Additional sensors and components may be required depending on the functionality being used. Please select the correct coil pack and injector options for your engine setup before ordering. If you have any questions or need help with your configuration, please get in touch HERE
Not Required, BA/BF Factory Coil Harness Only, FG/FGX Factory Coil Harness Only, BA/BF Factory Coil Harness + HPI6 Module & Harness, FG/FGX Factory Coil Harness + HPI6 Module & Harness, R35 Coil Harness Only, R35 Coil Conversion Kit
Not Required, Bosch EV1 (Factory Ford), USCAR EV6, Denso Sumitomo