Aquasol I-Purge X Inflatable Purge Bladder UAE Qatar Saudi

Aquasol I-Purge X Inflatable Purge Bladder UAE Qatar Saudi Aquasol — I-Purge®X · Modular Inflatable Bladder System · Made in USA Aquasol I-Purge X Inflatable Purge Bladder System The most adaptable modular inflatable purge bladder for TIG pipe welding. Patented Bladder Expansion Technology fits one unit to multiple pipe sizes — 2" to 70". Spark-resistant, high-heat, quick-connect. CE approved, ISO certified, made in the USA. Supplied across the UAE, Qatar, Saudi Arabia and wider GCC. Bladder Expansion Technology (BET) ✓ Fits 2"–70" Pipe ✓ Spark-Resistant Cover ✓ Harness to 1200°F / 650°C ✓ Tri-Flow Purge System ✓ Quick-Connect Modules ✓ CE Approved · ISO Certified 🇦🇪 UAE — Dubai · Abu Dhabi 🇶🇦 Qatar — Doha · Ras Laffan 🇸🇦 Saudi Arabia — Riyadh · Dammam · Jubail 🇰🇼 Kuwait 🇴🇲 Oman — Muscat 📲 Request a Quote — Pipe Size Range & Configuration UAE, Qatar, Saudi Arabia, Kuwait, Oman & all GCC WHATSAPP FOR BEST PRICING 1 Product Overview What It Is The Aquasol I-Purge X is a modular inflatable purge bladder system for TIG (GTAW) pipe welding. Two inflatable bladders seal inside the pipe on either side of the weld joint, creating a purge chamber that fills with inert gas to protect the weld root from oxidation. Its patented Bladder Expansion Technology (BET) lets one unit fit multiple pipe sizes and all schedules within its range — a reusable, long-term alternative to water-soluble paper dams. Who Uses It TIG welders, pipe fabricators, welding supervisors and QC engineers on stainless steel and alloy pipework across oil & gas, petrochemical, pharmaceutical, food & beverage, and power generation projects throughout the UAE, Qatar, Saudi Arabia, Kuwait and Oman. Ideal for fabrication shops and any pipe with accessible ends. Where It Is Used Stainless and duplex pipe TIG welding in fabrication shops and on-site across the GCC — from Dubai and Abu Dhabi to Doha, Ras Laffan, Riyadh, Dammam, Jubail, Kuwait and Muscat. Used wherever a fast, reusable, high-quality purge is needed on repeat pipe diameters. 2 Tri-Flow Purge System 🔵 BLUE — Inflate & Purge Inflates the bladders to seal against the pipe wall, then floods the weld zone with inert gas. The primary connection — required on every setup. 30 SCFH (15 LPM) for 2"–36"; 60 SCFH (28.5 LPM) for 38"–48". ⚫ BLACK — Direct Purge Optional secondary line that floods the weld zone with inert gas and evacuates oxygen at a faster rate — expediting the purge on larger pipe or where fast turnaround matters. ⚪ WHITE — Exhaust / Monitor Connects to an oxygen monitor such as the Aquasol POM-100B, reading down to 100 PPM (0.01%) for continuous or spot O₂ verification in the weld zone before welding starts. 3 Complete System Sizes (XABLD) I-Purge X Modular Inflatable System — Sold as Complete System Item No Min Dia. Max Dia. Harness Length Description XABLD 2-3 2" (51mm) 3" (76mm) 11" (279mm) Expandable double purge bag system w/ high heat harness XABLD 4-6 4" (102mm) 6" (152mm) 11" (279mm) Expandable double purge bag system w/ high heat harness XABLD 8-12 8" (203mm) 12" (305mm) 11" (279mm) Expandable double purge bag system w/ high heat harness XABLD 14-18 14" (356mm) 18" (457mm) 16" (406mm) Expandable double purge bag system w/ high heat harness XABLD 20-26 20" (509mm) 26" (660mm) 18" (457mm) Expandable double purge bag system w/ high heat harness XABLD 28-36 28" (711mm) 36" (914mm) 20" (509mm) Expandable double purge bag system w/ high heat harness XABLD 38-48 38" (965mm) 48" (1219mm) 36" (914mm) Expandable double purge bag system w/ high heat harness XABLD 50-58 50" (1270mm) 58" (1473mm) 42" (1067mm) Expandable double purge bag system w/ high heat harness XABLD 60-70 60" (1524mm) 70" (1778mm) 42" (1067mm) Expandable double purge bag system w/ high heat harness I-Purge X Isolator® — One-Sided Plug (XISO) Item No Dimensions Metric Description XISO 2-3 2-3" 51-76mm One-sided plug with 10' hose and valve XISO 4-6 4-6" 102-152mm One-sided plug with 10' hose and valve XISO 8-12 8-12" 203-305mm One-sided plug with 10' hose and valve XISO 14-18 14-18" 356-457mm One-sided plug with 10' hose and valve XISO 20-26 20-26" 509-660mm One-sided plug with 10' hose and valve XISO 28-36 28-36" 711-914mm One-sided plug with 10' hose and valve XISO 38-48 38-48" 965-1219mm One-sided plug with 10' hose and valve XISO 50-58 50-58" 1270-1473mm One-sided plug with 10' hose and valve XISO 60-70 60-70" 1524-1778mm One-sided plug with 10' hose and valve Optional Extended Length High-Heat Harnesses Item No Length Metric Application ABLD-ELH-24 24" (2') 610mm Extended length high heat harness ABLD-ELH-36 36" (3') 914mm Extended length high heat harness ABLD-ELH-48 48" (4') 1219mm Extended length high heat harness ABLD-ELH-72 72" (6') 1828mm Extended length high heat harness ABLD-ELH-CUSTOM Any size Any size Custom lengths available on request Fits 2"–70" Pipe Bladder Expansion Tech (BET) Cover to 400°F / 205°C Harness to 1200°F / 650°C CE Approved ISO Certified — Made in USA 4 Key Features & Benefits 🎈 Bladder Expansion Technology (BET) Patented technology lets one unit fit multiple pipe sizes and all schedules within its range — an 8-12" unit fits every pipe from 8" to 12". Bladders expand and contract repeatedly, dramatically reducing the number of purge units a fabrication shop needs to stock. 🔥 Spark-Resistant, High-Heat The durable exterior cover is infused with spark-resistant elements — it does not combust when exposed to flames and sparks, and withstands up to 400°F (205°C) against the pipe. The fiberglass bridge harness withstands up to 1200°F (650°C). 🔗 Quick-Connect Modules Push-button quick-connect fittings snap modules to the harness in seconds — no tools required. Individual modules and parts can be replaced separately, avoiding costly re-purchase of a complete system if one component wears or a new size is needed. 🌀 Inert Gas Diffuser Patent-pending diffuser reduces turbulence by dispersing inert gas equally in all directions within the weld zone — improving weld quality and consistency by preventing uneven gas flow across the root. 🛡️ Proprietary Relief Valve Factory pre-set relief valves deliver precise flow rates, maintain an optimum seal on the pipe wall, and prevent over-inflation and bladder burst. A low-profile relief valve is available on the 2" and 3" models. 🔧 Reducer & Isolator Configurations Combine modules of different sizes to create a reducer for stepped pipe joints, or use the I-Purge X Isolator as a one-sided pipe plug for purging valves and tanks, or for sealing during servicing, cleaning and inspection. 5 Applications by Industry Industry Application Oil & Gas — Pipe Fabrication Root pass purge for stainless and duplex pipe TIG welding on process piping and pipeline spools across ADNOC (UAE), Aramco (Saudi Arabia), QatarEnergy (Qatar), KOC (Kuwait) and PDO (Oman) Petrochemical High-quality purge for corrosion-resistant alloy pipework in refineries and chemical plants across Ruwais, Jubail, Ras Laffan and Dammam — where reusable bladders suit repeat pipe diameters Pharmaceutical & Food Hygienic stainless steel process pipe welding where oxide-free internal welds are mandatory — reusable, clean bladder purging for high-purity systems Power Generation Boiler, header, and high-pressure pipe TIG welding for power plant construction and maintenance across the GCC — extended harnesses handle pre-heat/high-heat applications Shipbuilding & Offshore Stainless marine and offshore process pipe welding in shipyards and on platforms across UAE, Saudi Arabia and Qatar Isolation & Testing I-Purge X Isolator as a pipe plug for valve/tank purging, and for sealing pipe systems during servicing, cleaning, inspection and pressure testing 6 Frequently Asked Questions What is an inflatable purge bladder and how does it work?An inflatable purge bladder system creates a purge dam inside a pipe for TIG welding. Two inflatable bladders are inserted on either side of the weld joint and inflated with inert gas to seal against the pipe wall, forming a purge chamber around the weld zone. Argon then fills the chamber, displacing oxygen so the weld root is protected from oxidation. The Aquasol I-Purge X uses patented Bladder Expansion Technology (BET) so one unit fits a range of pipe sizes, with a spark-resistant cover protecting the bladder from weld heat and sparks. What pipe sizes does the I-Purge X fit?Available in expandable ranges from 2-3" (51-76mm) up to 60-70" (1524-1778mm). Thanks to BET, one unit fits every size within its range and all schedules for that diameter — an 8-12" unit fits any pipe from 8" to 12". Modules of different sizes can be combined to create a reducer for stepped pipe joints. What temperature can the I-Purge X withstand?The spark-resistant outer cover withstands up to 400°F (205°C) in direct contact with the pipe, and the fiberglass bridge harness up to 1200°F (650°C). Because the bladder interior has lower heat resistance, keep the overall system below 250°F (120°C) for proper operation. For pre-heat and high-heat welding, an extended length harness places the bladders outside the heat-affected zone (HAZ). What is the Tri-Flow hose system?Three separate hoses: BLUE inflates the bladders and floods the weld zone with inert gas (required); BLACK is an optional direct purge line that floods and evacuates oxygen faster; WHITE connects to an oxygen monitor like the Aquasol POM-100B (reads to 100 PPM / 0.01%) for real-time purge verification. Together they give faster purging with accurate oxygen monitoring. How can I get pricing in UAE, Qatar, Saudi Arabia, Kuwait or Oman?Global Hardware & Tools LLC supplies the Aquasol I-Purge X system, isolators, modules, harnesses and accessories across UAE (Dubai, Abu Dhabi), Qatar (Doha), Saudi Arabia (Riyadh, Dammam, Jubail), Kuwait, Oman (Muscat) and Iraq. 📲 WHATSAPP FOR BEST PRICING — +971 55 697 6535 Aquasol Weld Purging Products — Regional Supply Across the GCC Global Hardware & Tools LLC supplies the Aquasol I-Purge X inflatable purge bladder system — complete systems, isolators, modules, high-heat harnesses and accessories — across the UAE (Dubai, Abu Dhabi), Qatar (Doha, Ras Laffan), Saudi Arabia (Riyadh, Dammam, Jubail, Jeddah), Kuwait (Kuwait City), Oman (Muscat), Bahrain, and Iraq (Baghdad, Basra). Reusable, high-quality weld purging for oil & gas, petrochemical, pharmaceutical, and power projects throughout the Gulf. View Our Global Service Network (GCC & Middle East) UAEDubai · Abu Dhabi · Sharjah. Ruwais · Jebel Ali. QatarDoha · Ras Laffan. Mesaieed · Al Wakrah. Saudi ArabiaRiyadh · Jeddah · Dammam. Jubail · Yanbu · Khobar. Kuwait & BahrainKuwait City · Shuwaikh. Manama (Bahrain). OmanMuscat · Sohar · Salalah. IraqBaghdad · Basra · Erbil.