T-Deck Plus - 915 MHz - with External Antenna
Upgraded based on T-Deck, mainly added GPS module, and Built-in 2000 mah battery. LilyGo Factory Firmware Who can use It's easier to master these development boards with a basic programming knowledge [engineers/ students/ makers, etc.] Specifications MCU ESP32-S3FN16R8 Dual-core LX7 microprocessor Wireless Connectivity 2.4 GHz Wi-Fi & Bluetooth 5 (LE) Development Arduino, PlatformlO-IDE, Micropython Flash 16 MB PSRAM 8MB Battery ADC PIN IO04 Onboard functions GPS,TF Card,Microphone,Speaker LCD 2.8 inch ST7789 SPI Interface IPS LCD: Resolution: 320 x 240 Full viewing angle Transceiver SX1262 LoRa Transceiver Transmit power +22dBm Frequency Optional 433/868/915Mhz Flash Firmware with Meshtastic UI: Connect the T-Deck Plus to your computer using a USB-C cable Turn on the T-Deck Plus by holding down the trackball button and sliding the powering button down. There will be nothing shown on the display. Visit https://flasher.meshtastic.org/ Select T-Deck as the target device Select the version required Click on Flash and make sure to do a Full Erase and Install and enable the Meshtastic UI. Select your device in the pop-up. Turn your T-Deck Plus off and on to use the new UI. Select your region and pick your name. Links GitHub: https://github.com/Xinyuan-LilyGO/T-Deck