BB Long Length 75mm 100mm 120mm 150mm 200mm 250mm D6 Shank 6mm 4mm Diameter 6mm 8mm 10mm 12mm End Mill
Suggestions Milling cutters and operating instructions that buyers need to know 01.Before using the tool, please measure the tool deviation. If the tool deviation accuracy exceeds 0.01mm, please correct it before cutting 02.The shorter the length of the tool extending out of the chuck, the better. If the tool extends out longer, it is necessary to reduce the speed, feed rate, or cutting amount 03.If abnormal vibration or sound occurs during re cutting, please reduce the speed and cutting amount until the situation improves 04.Steel cooling, preferably of spray type and puff type, can improve the use effect of milling cutter 05.Note: Not suitable for low-speed machines such as bench drills, electric drills, etc Multiple Blade Sharpness Options Available 2-flute end mills are typically used for simpler milling tasks such as light planar milling and groove machining. Due to their fewer cutting edges, they are suitable for small-scale roughing and the machining of less complex workpieces. 3-flute end mills find applications in a variety of milling tasks, especially where higher cutting efficiency and better surface quality are required. Three-flute end mills are commonly used for machining step surfaces and through shallow grooves, with their design aiding in enhancing cutting efficiency and improving cutting conditions. 4-flute end mills, with their four cutting edges, can provide higher cutting efficiency and stability, making them suitable for a wider range of milling tasks. They can be used not only for planar milling but also for groove machining, step surface machining, and contour milling of complex shapes. Additionally, 4-flute end mills can be used for keyway machining; although they are not specialized keyway mills, they can suffice in simpler scenarios. Suitable for Processing Methods Flat Machining/Side Processing/Spot Facer Machining/Slot Cutting Processing/U-Groove Processing etc. Suitable for Processing Materials Very Suitable/Fit/Not Recommend Blade Alloy Coating The blade is coated with ALTIN (nano-gray coating), which enables direct machining of 58-degree heat-treated materials from roughing to finishing. This reduces the frequency of tool changes, enhances machine utilization rates, and saves on production time. Steel Use:AlTiSiN Coating,Iron Plate , Stainless Steel ,Die Steel, Quenched Steel,etc. Aluminum Use:Mirror Gloss,Aluminum Alloy,Aluminum Material,Magnesium Alloy,Copper,etc. Long length End Mills and Full Flute End Mills Available Long Length/Full Flute Ultrafine Carbide Base Material Good toughness and high hardness. Hard Carbide material alloy features high compatibility, high hardness, and high strength, ensuring smooth and fast cutting, making it a specialized milling cutter material for high-speed cutting applications Full Ground Cutting Edge The cutting edge is burr-free, reducing the frequency of tool changes and extending service life High chip removal rate, Helix Angle Design Large chip evacuation groove cutting, ensuring smooth chip removal and reduced risk of edge chipping Chamfer Design The handle has a chamfered design, making it easier to clamp