NeoCree V2 Converter Module (NeoPixel to High Power LED)

Convert your NeoPixel lightsaber into a powerful in-hilt LED lightsaber in seconds! The NeoCree V2 Converter Module is a high-performance Pixel-to-TriCree converter module designed to transform any pogo-pin NeoPixel lightsaber into a traditional high-power RGB setup. Whether you're looking for a more durable solution for duelling, or simply want the option to run an in-hilt LED, this module gives you the flexibility to do both. Engineered around high-output Cree XP-E2 LEDs and a dedicated driver PCB, the NeoCree V2 delivers excellent brightness and reliability. The integrated copper heat sink and direct thermal path ensure efficient cooling, making it suitable for sustained use and full-contact duelling. This module effectively acts as the first “pixel” in your blade, interfacing directly with standard pogo-pin connectors, and includes a built-in 2kΩ blade ID resistor for compatibility with common soundboard setups. Supplied in a Red / Green / Royal Blue configuration, this setup provides a wide colour range and excellent colour mixing straight out of the box. Custom single color configuration can be ordered directly from ShtokCustomWorx. NeoCree Baselit Proffieboard Blade Styles can be found here. Key Features Instantly convert NeoPixel lightsabers to in-hilt RGB LED. High-output Cree XP-E2 LEDs for maximum brightness. Fixed Red / Green / Royal Blue configuration. Designed for full-contact duelling use. Large copper heat sink for efficient thermal management. Built-in driver PCB with 1300–1500mA drive per channel. Integrated 2kΩ blade ID resistor (Data to GND). Compatible with standard pogo-pin connectors. Supports both 1" and 7/8" blade setups. Specifications SCW Direct Thermal Path copper core MCPCB. Dimensions: 1" Version: Ø25.3mm x 20mm 7/8" Version: Ø22.2mm x 20mm Compatible with thin and thick-walled blades. Works with 1" to 7/8" adapters where required. Designed to interface with all major hilt side PCBs (Vader’s Vault, Genesis Custom Sabers, Sabertrio, and other custom sabers). What’s Included NeoCree V2 Converter Module 1" and 7/8" Adapter Casings ⚠️⚠️⚠️ CAUTION ⚠️⚠️⚠️ LED module can get very hot up to 70-80°C when using all 3 LED channels at full power for a prolonged period, so we recommend to keep the module inside the saber after turning off the blade until it cools down and will be safe to touch. Please be sure that before ordering, you are fully aware of the shipping policies outlined here: https://thesaberarmory.com/shipping-policies/