ALINX AXW47: Xilinx Zynq UltraScale+ RFSoC XCZU47DR FPGA Development Board

Features What's Included Resources & Downloads Description AMD Zynq™ UltraScale+™ RFSoCs - The Industry’s Only Single-Chip Adaptable Radio Platform AMD Zynq™ UltraScale+™ RFSoC Gen 3: Quad-core Arm Cortex-A53 MPCore up to 1.33 GHz Dual-core Arm Cortex-R5F MPCore up to 533 MHz 16nm FinFET+ Programmable Logic Soft-decision forward error-correction cores (SD-FEC) Source: https://www.amd.com/en/products/adaptive-socs-and-fpgas/soc/zynq-ultrascale-plus-rfsoc.html AXW47 is a Unique dual FPGA High Performance SDR board with XCZU47DR FPGA, equipped with an extra XCKU115 for data processing, 8×14-bit 5GSPS RF-ADCs, 8×14-bit 9.85GSPS RF-DACs, 6GB DDR4, 2× QSFP+, 1× SFP+, 4× M.2, 8T8R RF SMP ports, built for direct RF processing. Ideal for 5G, Radar, Satellite, and Wideband. Ideal for: 5G and LTE Wireless Remote-PHY for Cable Access DOCSIS 3.1 Phased Array Radar/Digital Array RADAR Test & Measurement Satellite Communications The SOM model is ACW47. Also check out our AXW49 with XCZU49DR. FPGA Specification (RFSoc) SOM ACW47 FPGA XCZU47DR-2FFVE1156I 14-bit RF-ADC w/DDC 8x, Max Rate (GSPS) 5.0 14-bit RF-DAC w/DUC 8x, Max Rate (GSPS) 9.85 Number of DDCs per RF-ADC 1 RF input Freq max. GHz 6 Decimation / Interpolation 1x, 2x, 3x, 4x, 5x, 6x, 8x, 10x, 12x, 16x, 20x, 24x, 40x Processors 4x ARM Cortex-A53, 1.333GHz 2x ARM Cortex-R5F, 533MHz High-Speed Connectivity 4 PS-GTR; PCIe Gen1/2; Serial ATA 3.1; DisplayPort™ 1.2a; USB 3.0; SGMII General Connectivity 214 PS I/O; UART; CAN; USB 2.0; I2C; SPI; 32b GPIO; Real Time Clock; Watchdog Timers; Triple Timer Counters GTY 16x Chip Level Industrial Grade Speed Grade -2 Working Temperature -40℃~85℃ System Logic Cells (K) 930 CLB LUTs (K) 425 Max. Dist. RAM (Mb) 13.0 Total Block RAM (Mb) 38.0 UltraRAM (Mb) 22.5 DSP Slices 4,272 1.8V High-Performance (HP) I/Os 104 3.3V High-Density (HD) I/O 48 FPGA Specification (Kintex UltraScale) FPGA XCKU115-FLVB2104 16.3Gb/s Transceivers (GTH/GTY) 64x Chip Level - Speed Grade - Working Temperature -40℃~85℃ System Logic Cells (K) 1,451 CLB Flip-Flops 1,326,720 CLB LUTs 663,360 Maximum Distributed RAM (Kb) 18,360 Total Block RAM (Mb) 75.9 CMT (1 MMCM, 2 PLLs) 24 DSP Slices 5,520 Maximum Single-Ended HP I/Os 676 Maximum Single-Ended HR I/Os 156 Board Features DDR4 (SOM - RFSoC) PS: 4x 1GB DDR4, total 4GB, 64bit Bus, Data Rate 2400Mbps PL: 2x 1GB DDR4, total 2GB, 32bit Bus, Data Rate 2400Mbps DDR4 (Carrier Board - Kintex UltraScale) 16x 1GB DDR4, total 16GB, 64bit Bus, Data Rate 2400Mbps QSPI FLASH (SOM - RFSoC) 2x 1024Mbit, for user data storage (Carrier Board - Kintex UltraScale) 2x 512Mbit, for user data storage eMMC 32GB 40G SFP+ 2x 10G SFP+ 1x M.2 4x NVME M.2 (PCIEx4), for M.2 SSD storage MGB 2x, for expansion of 2x PCIE x4 (PCIE Gen3.0), connector (ARF6-16-S-D-A-K-TR) USB 3.0 2x USB3.0, (Type-C, HOST, SLAVE), for external USB devices USB JTAG / UART 1x each Type-C for RFSoC & Kintex UltraScale, UART for serial communication with PC or devices JTAG for Programs Debug and Download Ethernet Interface 1x 10/100/1000M Ethernet with RJ45 for data exchange Active Crystal Oscillator 1x Single-ended 33.3333MHz provide PS Clock 1x LMK04828 for the PL Logic, DDR Reference, GTY Expansion Port 2x 8-pin PL I/O; 1x 10-pin PS I/O EEPROM 1x M24C08-RDW6TP 8Kb with IIC SD Card Slot 1 micro SD Card Slot, support SD Mode and SPI Mode Real Time Clock 1x Built-in RTC LEDs SOM: 8x, STATUS, POWER Carrier: 4x User (RFSoC); 8x User (KU) Push-Buttons 1x Reset, 5x User (RFSoC) Power Supply Voltage Input: +12 V DC, PCIE 8-pin Current Input: Max. Current 8.5 A What's Included FPGA Board 1 DC Fan (installed) 2 USB to Type-C cable 1 12V Power Adapter 1 set SD Card 1x 32GB SD Card Reader 1 Dimensions Dimension 259.90 mm x 215.00 mm (Carrier Board) 90.00 mm x 80.50 mm (SOM) PCB Independent GND and Power Layers Resources & Downloads AXW47 User Manual (PDF, Simplified Chinese) Full documentation including Schematics, Demo projects (if applicable) will be provided by CodeRobin.