Case MX170 sticker

there are x2 options the older straight stickers the newer curved sticker 26mm wide window sticker 46mm wide printed on clear vinyl Bonnet Professional pre-cut, extra thin and waterproof stickers, ready for use. These stickers are also very suitable for labeling convex surfaces and have a high adhesive strength. You can apply these stickers with the "Dry" or "Wet" method. Dry method: (Recommended) -Apply decal at room temperature -Clean & dry the surface -Remove the excess foil from the delivered sticker -"Remove" the pre-cut decal from the decal sheet and place it on your model -Press the sticker firmly to activate the pressure sensitive adhesive; This is fully cured after 48 hours Wet Method: -Apply to model at room temperature -Clean & dry the surface -Mix 1 drop of soap with lime-free water (boiled or distilled) in a container or plant sprayer -Remove the excess foil from the supplied sticker sheet -Spray the surface to be stickered with the plant sprayer -"Remove" the pre-cut sticker from the sticker sheet and place your decal on your model or -Put your sticker through the water/soap tray and place your sticker on your model - Correct the position if necessary: these stickers are perfect for that - Rub the water under the sticker from the center to the outside of the sticker -Press the sticker firmly to activate the pressure sensitive adhesive; This is fully cured after 48 hours Professional custom pre-cut stickers. Color fade and water resistant for years.