The Original Ceramic Coating 30ML

Made by the pioneers of ceramic coating, FeynLab continues to lead the ceramic coating game in gloss, hydrophobicity, slickness, and ease of application. First-time installer friendly but sophisticated enough for professional use as well. With proper maintenance, this coating will outlast many coatings of the same category. This 30ml bottle is enough for a single vehicle. 1 year/12 months+ of Protection User-Friendly with long wipe-on/wipe-off windows Top of its class in gloss, slickness, and durability Outperforms traditional waxes and spray-on ceramics Safe on all Painted Surfaces, Black Textured Plastic Trim, Piano Black Trim, Clear-Coated Wheels & Calipers, Chrome, Glass, and Headlights & Taillights Creates a slick surface to make in-between washes easier Made in the USA What's in the box? The Original Ceramic Coating - 30 ml Ceramic Coating Microfiber Applicator How To Use Instructions: Prep: Start off by washing the vehicle thoroughly using Wash & Gloss Car Shampoo or Ceramic Bubble Bath. For best results and ensuring that the coating will adhere to the paint properly, decontaminate the vehicle by spraying Ultimate Iron. Then, clay the vehicle using a clay bar or towel with Clay Lubricant. Paint correction is recommended but up to the owner's discretion and can be skipped. Finally, use Surface Prep Spray to ensure a clean surface for applying the coating. Application: Best Conditions: Apply in a shaded, climate-controlled space (ideally 60 to 80°F), and never in direct sunlight. Good lighting is essential for preventing coating high spots throughout the vehicle. Cut the seals of the Push to Start box and open the coating bottle. Prime the provided microfiber applicator with several drops (10-15). For first-time users, start by working on a 2' by 2' box or a quarter of a panel at a time, overlapping your work by 50% on each pass and with a cross-hatching motion. Let the coating adhere to the paint for about 60 seconds. Ensure that you have sufficient lighting around the vehicle to be able to see the coating flash and wipe off high spots. Once you see the "rainbow" flash, the coating is ready to be wiped off. Use a two-towel method consisting of ceramic coating towels to remove the majority of the coating and plush towels to completely wipe off the remaining coating. If you start to see smearing from your towels, flip to a different side, or once all 8 sides are used, (each towel folded in quarters, both sides = 8 sides), switch to a new towel. Once finished, keep the vehicle away from water and elements as it cures for 24 hours. SoCal Wax Notice: The Original Ceramic Coating and all ceramic coatings require proper and specific installation. Incorrect installation may result in high spots that will need to be polished out. Avoid automatic car washes and harsh soaps to ensure that the coating can continue to perform. Please use with care so you can enjoy all the benefits of a ceramic coating! Feel free to email or call us for further instructions or questions.