Overtake Bolt-On Wheel Spacers 5x100 20mm
These spacers cost a little more than the standard wafer type, but the difference is that they come with their own captive studs, so you don't have to take apart your hubs or press in new longer studs. Plus, if you ever want to take the spacers off, your original short studs are right where they always were. Overtake spacers include a bunch of special features you won't find on commodity spacers from random auction-style websites. First off, Overtake wheel spacers are CNC-forged from super-strong 7075 aluminum stronger than the standard 6061 material. Dacromet-coated corrosion-resistant grade 12.9 studs and special low-profile lug nuts ensure a tight and trouble-free connection to the car and wheel. Each spacer is laser-marked with the bolt pattern and thickness, so you can tell what they are and what they fit, at a glance. Even the torque specs are listed on there! Of course the Overtake logo is featured proudly on the edge. The spacers are hubcentric to both your Subaru car and the wheel, too. 20mm thickness is a popular choice for making OEM wheels flush on the 2008+ WRX and WRX STI cars, but the desired spacing can vary based on wheel size and offset, tire size, and other variables. Get out your ruler and measure twice! The edges on both sides are chamfered so they don't catch and snag, for easier installation. Type II hard anodized black finish protects against oxidation and galvanic corrosion. Three little pry tool notches on the edge of each spacer facilitate easy removal when the time comes. Each set includes special low-profile lug nuts. Note that these 20mm spacers are thin enough that a little of the stock studs will poke through -- you will need wheels that have cavities in the back to allow for the stud length, or trim the extra length off the studs. These are 5x100 wheel spacers. If you need 5x114, we have those HERE. Note: Installing wheel spacers increases the possibility of tire-to-fender clearance issues. Install and use these products at your own risk! Wheel spacers that have been installed on a car -- even once -- MAY NOT BE RETURNED. Thank you. NOTE 2: The studs on these are almost the exact length of OEM Subaru studs, but we have seen at least one instance where a specific OEM Subaru wheel lock has been too short and the lock ended up bottoming out on the stud and breaking. We recommend you DO NOT USE these specific Subaru wheel locks with our spacers. The lock in question is very short, about 24mm in overall length. Use a longer wheel lock instead. Sold as a PAIR of two spacers or a SET of four spacers. Fits all 5x100 Subaru cars.