V-Ribbed Belt Tensioner for Suzuki Grand Vitara II & SX4 - MAP-101172

Vehicle Fitment & Part Details This v-ribbed belt tensioner (MAP-101172) is listed for the Suzuki Grand Vitara II and SX4, cross-referencing Suzuki OE 17540 54L00. It uses a 70 mm belt pulley (26 mm wide). Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN/engine. Key Details SKU MAP-101172 Component V-Ribbed Belt Tensioner Specs Belt pulley 70 mm diameter x 26 mm width Primary Fitment Suzuki Grand Vitara II (JT, TE, TD), 2005-2015 Listing Highlights Listed for selected Suzuki Grand Vitara II and SX4 applications shown in the fitment table. Cross-referenced to listed Suzuki OE numbers for compatibility checking before ordering. Belt pulley measures 70 mm diameter x 26 mm width. Specification Value Belt Pulley Diameter 70 mm Belt Pulley Width 26 mm Vehicle Fitment This v-ribbed belt tensioner is listed for 11 applications across the Suzuki Grand Vitara II (JT, TE, TD), Suzuki SX4 (EY, GY) and SX4 Saloon ranges, with supplied year coverage from 2005 onwards. Use the full table below to confirm model, chassis, engine, year range and power before ordering. Primary OE references: 17540 54L00, 17540 78K00, 17540 54L00 RX0, 17540 54L00 000, 1754078K00000. View Full Vehicle Fitment (11 applications) Model Chassis Engine Years Power Grand Vitara II TD54V, JB420 2.0 All-wheel Drive (J20A) 2005-2015 103 kW Grand Vitara II JB420 2.0 (J20A) 2005-2015 103 kW Grand Vitara II JB424 2.4 All-wheel Drive (J24B) 2009- 124 kW Grand Vitara II JT424, JB424, TDA4 2.4 All-wheel Drive (J24B) 2009- 122 kW Grand Vitara II JB424 2.4 (J24B) 2009- 124 kW SX4 RW420D 2.0 DDiS (D20AA) 2009- 99 kW SX4 RW420D 2.0 DDiS 4x4 (D20AA) 2009- 99 kW SX4 RW415, RW416, RW420, YB41S 2.0 4x4 (J20A) 2006- 107 kW SX4 RW415, RW416, RW420, YA41S 2.0 (J20A) 2006- 107 kW SX4 RW415, RW416, RW420 2.0 16V 4x4 (J20B) 2010- 112 kW SX4 Saloon RW415, RW416, RW420 2.0 (J20A) 2007-2010 107 kW OEM Reference Numbers (Suzuki) 17540 54L00 17540 78K00 17540 54L00 RX0 17540 54L00 000 1754078K00000 Alternate OEM Search References: 1754054L00, 1754078K00, 1754054L00RX0, 1754054L00000 Fitment Notes Always match OEM reference number(s) and vehicle details before ordering. Verify VIN/engine. Compatibility Verification Notes Confirm compatibility using VIN, engine code, chassis / platform, OE reference and original part comparison before ordering. Match the listed vehicle details to your vehicle, including model, chassis / platform, engine, year range and power. Confirm the belt pulley diameter and width against your original tensioner before ordering. Open-ended dates reflect supplier catalogue data and must be confirmed against the vehicle before ordering. This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person. Common Questions Will this v-ribbed belt tensioner fit my Suzuki Grand Vitara II? This part (MAP-101172) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine. What OEM part numbers does this cross-reference? Cross-reference numbers are listed in the OEM Reference Numbers section above. Match at least one to your original part before ordering. How do I confirm fitment if there are multiple variants? Compare the supplied fitment details, OE reference numbers, original part details and any listed variant information before ordering. Verify VIN/engine.